lkml.org 
[lkml]   [2022]   [Jan]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] usb: raw-gadget: fix handling of dual-direction-capable endpoints
On Wed, Jan 26, 2022 at 11:12 PM Andrey Konovalov <andreyknvl@gmail.com> wrote:
> On Wed, Jan 26, 2022 at 9:52 PM Jann Horn <jannh@google.com> wrote:
> >
> > Under dummy_hcd, every available endpoint is *either* IN or OUT capable.
> > But with some real hardware, there are endpoints that support both IN and
> > OUT. In particular, the PLX 2380 has four available endpoints that each
> > support both IN and OUT.
> >
> > raw-gadget currently gets confused and thinks that any endpoint that is
> > usable as an IN endpoint can never be used as an OUT endpoint.
> >
> > Fix it by looking at the direction in the configured endpoint descriptor
> > instead of looking at the hardware capabilities.
> >
> > With this change, I can use the PLX 2380 with raw-gadget.
> >
> > Fixes: f2c2e717642c ("usb: gadget: add raw-gadget interface")
> > Signed-off-by: Jann Horn <jannh@google.com>
> > ---
> > drivers/usb/gadget/legacy/raw_gadget.c | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/drivers/usb/gadget/legacy/raw_gadget.c b/drivers/usb/gadget/legacy/raw_gadget.c
> > index c5a2c734234a..d86c3a36441e 100644
> > --- a/drivers/usb/gadget/legacy/raw_gadget.c
> > +++ b/drivers/usb/gadget/legacy/raw_gadget.c
> > @@ -1004,7 +1004,7 @@ static int raw_process_ep_io(struct raw_dev *dev, struct usb_raw_ep_io *io,
> > ret = -EBUSY;
> > goto out_unlock;
> > }
> > - if ((in && !ep->ep->caps.dir_in) || (!in && ep->ep->caps.dir_in)) {
> > + if (in != usb_endpoint_dir_in(ep->ep->desc)) {
> > dev_dbg(&dev->gadget->dev, "fail, wrong direction\n");
> > ret = -EINVAL;
> > goto out_unlock;
> >
> > base-commit: 0280e3c58f92b2fe0e8fbbdf8d386449168de4a8
> > --
> > 2.35.0.rc0.227.g00780c9af4-goog
> >
>
> Awesome! Thanks for finding this!
>
> What do you think about using
>
> if ((in && !ep->ep->caps.dir_in) || (!in && !ep->ep->caps.dir_out))
>
> instead?
>
> It looks less cryptic: if (in and no in caps) or (out and no out caps) => fail.

That's also semantically different, right?
As I understand it, what we should be checking here is whether the
direction of the request matches the direction previously specified in
USB_RAW_IOCTL_EP_ENABLE, not whether the hardware would be capable of
using the endpoint in the requested direction if it had been
configured for that direction?
But I might also be misunderstanding what's going on - it's not like
I've looked at a spec for this or anything like that, I'm just kinda
guessing...

\
 
 \ /
  Last update: 2022-01-26 23:32    [W:0.062 / U:0.572 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site