lkml.org 
[lkml]   [2022]   [Jan]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/8] Add ethernet support for Qualcomm SA8155p-ADP board
Date
The SA8155p-ADP board supports on-board ethernet (Gibabit Interface),
with support for both RGMII and RMII buses.

This patchset adds the support for the same.

Note that this patchset is based on an earlier sent patchset
for adding PDC controller support on SM8150 (see [1]).

[1]. https://lore.kernel.org/linux-arm-msm/20220119203133.467264-1-bhupesh.sharma@linaro.org/T

Bhupesh Sharma (3):
clk: qcom: gcc: Add PCIe, EMAC and UFS GDSCs for SM8150
clk: qcom: gcc-sm8150: use runtime PM for the clock controller
clk: qcom: gcc-sm8150: Use PWRSTS_ON (only) as a workaround for emac
gdsc

Bjorn Andersson (1):
net: stmmac: dwmac-qcom-ethqos: Adjust rgmii loopback_en per platform

Vinod Koul (4):
dt-bindings: net: qcom,ethqos: Document SM8150 SoC compatible
net: stmmac: Add support for SM8150
arm64: dts: qcom: sm8150: add ethernet node
arm64: dts: qcom: sa8155p-adp: Enable ethernet node

.../devicetree/bindings/net/qcom,ethqos.txt | 4 +-
arch/arm64/boot/dts/qcom/sa8155p-adp.dts | 144 ++++++++++++++++++
arch/arm64/boot/dts/qcom/sm8150.dtsi | 27 ++++
drivers/clk/qcom/gcc-sm8150.c | 105 +++++++++++--
.../stmicro/stmmac/dwmac-qcom-ethqos.c | 37 ++++-
include/dt-bindings/clock/qcom,gcc-sm8150.h | 9 +-
6 files changed, 305 insertions(+), 21 deletions(-)

--
2.34.1

\
 
 \ /
  Last update: 2022-01-26 23:18    [W:0.139 / U:0.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site