lkml.org 
[lkml]   [2022]   [Jan]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 0/5] iommu/amd: fixes for suspend/resume
From
Date
On Tue, 2022-01-25 at 23:25 +0000, Mike Lothian wrote:
> On Tue, 25 Jan 2022 at 19:26, Maxim Levitsky <mlevitsk@redhat.com> wrote:
> > Could you just apply these patches on top of 5.15 kernel and see if you get the warning?
> >
> > If something could case it is I think patch 1, it does move the GA log enabled
> > to be a bit later.
> > I also added few warnings there. I wonder why your dmesg quote doesn't contain the C line
> > where the warning happens.
> >
> > In partucular I added:
> >
> > if (WARN_ON(status & (MMIO_STATUS_GALOG_RUN_MASK)))
> >
> > That will fire if GA log is already running (maybe BIOS enabled it? - it really shouldn't do that)
> >
> >
> > And that:
> >
> > if (WARN_ON(i >= LOOP_TIMEOUT))
> >
> > also should not happen and worth to be logged IMHO.
> >
> > Best regards,
> > Maxim Levitsky
> >
>
> Hi
>
> I applied on top of another kernel as you asked, I also enabled some debugging
>
> [ 0.398833] ------------[ cut here ]------------
> [ 0.398835] WARNING: CPU: 0 PID: 1 at drivers/iommu/amd/init.c:839
> amd_iommu_enable_interrupts+0x1da/0x440
> [ 0.398840] Modules linked in:
> [ 0.398841] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.16.0-rc5-agd5f+ #1388
> [ 0.398843] Hardware name: ASUSTeK COMPUTER INC. ROG Strix
> G513QY_G513QY/G513QY, BIOS G513QY.316 11/29/2021
> [ 0.398845] RIP: 0010:amd_iommu_enable_interrupts+0x1da/0x440
> [ 0.398847] Code: 4b 38 48 89 41 18 b8 a0 86 01 00 0f 1f 44 00 00
> 48 8b 4b 38 8b 89 20 20 00 00 f7 c1 00 01 00 00 0f 85 7a fe ff ff ff
> c8 75 e6 <0f> 0b e9 6f fe ff ff 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44
> 0
> 0 00
> [ 0.398850] RSP: 0018:ffff888100927c68 EFLAGS: 00010246
> [ 0.398851] RAX: 0000000000000000 RBX: ffff88810004b000 RCX: 0000000000000018
> [ 0.398853] RDX: 0000000000000008 RSI: ffff888100927c70 RDI: ffffc900000800f0
> [ 0.398854] RBP: ffff888100927c68 R08: ffff8881015b8f88 R09: 0000000000000000
> [ 0.398855] R10: 0000000000000000 R11: ffffffffffffffff R12: ffffffff7fffffff
> [ 0.398856] R13: 0000777f80000000 R14: 0000000000000000 R15: ffffffff8357a758
> [ 0.398858] FS: 0000000000000000(0000) GS:ffff888fde400000(0000)
> knlGS:0000000000000000
> [ 0.398859] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [ 0.398860] CR2: 0000000000000000 CR3: 00000000ac40c000 CR4: 0000000000150ef0
> [ 0.398862] Call Trace:
> [ 0.398864] <TASK>
> [ 0.398864] ? iommu_setup+0x29a/0x29a
> [ 0.398867] ? state_next+0x6e/0x1c9
> [ 0.398870] ? iommu_setup+0x29a/0x29a
> [ 0.398872] ? iommu_go_to_state+0x1f/0x33
> [ 0.398873] ? amd_iommu_init+0xa/0x23
> [ 0.398875] ? pci_iommu_init+0xf/0x45
> [ 0.398876] ? iommu_setup+0x29a/0x29a
> [ 0.398878] ? __initstub__kmod_pci_dma__244_136_pci_iommu_initrootfs+0x5/0x8
> [ 0.398880] ? do_one_initcall+0x100/0x290
> [ 0.398882] ? do_initcall_level+0x8b/0xe5
> [ 0.398884] ? do_initcalls+0x44/0x6d
> [ 0.398885] ? kernel_init_freeable+0xc7/0x10d
> [ 0.398886] ? rest_init+0xc0/0xc0
> [ 0.398888] ? kernel_init+0x11/0x150
> [ 0.398889] ? ret_from_fork+0x22/0x30
> [ 0.398891] </TASK>
> [ 0.398892] ---[ end trace f048a4ec907dc976 ]---
>
> Which points to patch one and "if (WARN_ON(i >= LOOP_TIMEOUT))"


Could you post the whole dmesg, or at least:

dmesg | grep AMD-Vi


What CPU does your system have?

I suspect that your system doesn't GA log feature enabled in the IOMMU, and the code never checks
for that, and here it fails enabling it, which before my patches was just
ignoring it silently.


Best regards,
Maxim Levitsky
>
> Hope that helps
>
> Mike
>


\
 
 \ /
  Last update: 2022-01-26 08:35    [W:0.298 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site