Messages in this thread | | | Date | Tue, 25 Jan 2022 17:21:21 +0000 | From | Marc Zyngier <> | Subject | Re: [PATCH] PCI: mediatek: Change MSI interrupt processing sequence |
| |
On 2022-01-25 16:57, Bjorn Helgaas wrote: > All patches change *something*. Can you update the subject line so it > says something specific about the change? > > Maybe something like "Clear MSI status before dispatching handler"? > > On Sun, Jan 23, 2022 at 11:33:06AM +0800, qizhong cheng wrote: >> As an edge-triggered interrupts, its interrupt status should be >> cleared >> before dispatch to the handler of device. > > I'm not an IRQ expert, but the reasoning that "we should clear the MSI > interrupt status before dispatching the handler because MSI is an > edge-triggered interrupt" doesn't seem completely convincing because > your code will now look like this: > > /* Clear the INTx */ > writel(1 << bit, port->base + PCIE_INT_STATUS); > generic_handle_domain_irq(port->irq_domain, bit - INTX_SHIFT); > ... > > /* Clear MSI interrupt status */ > writel(MSI_STATUS, port->base + PCIE_INT_STATUS); > generic_handle_domain_irq(port->inner_domain, bit); > > You clear interrupt status before dispatching the handler for *both* > level-triggered INTx interrupts and edge-triggered MSI interrupts. > > So it doesn't seem that simply being edge-triggered is the critical > factor here.
This is the usual problem with these half-baked implementations. The signalling to the primary interrupt controller is level, as they take a multitude of input and (crucially) latch the MSI edges. Effectively, this is an edge-to-level converter, with all the problems that this creates.
By clearing the status *after* the handling, you lose edges that have been received and coalesced after the read of the status register. By clearing it *before*, you are acknowledging the interrupts early, and allowing them to be coalesced independently of the ones that have been received earlier.
This is however mostly an educated guess. Someone with access to the TRM should verify this.
Thanks,
M. -- Jazz is not dead. It just smells funny...
| |