lkml.org 
[lkml]   [2022]   [Jan]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH net-next v1 3/9] net: ethernet: mtk-star-emac: add support for MT8365 SoC
On Thu, Jan 20, 2022 at 8:02 AM Biao Huang <biao.huang@mediatek.com> wrote:
>
> Add Ethernet driver support for MT8365 SoC.
>
> Signed-off-by: Biao Huang <biao.huang@mediatek.com>
> Signed-off-by: Yinghua Pan <ot_yinghua.pan@mediatek.com>
> Signed-off-by: Fabien Parent <fparent@baylibre.com>
> ---
> drivers/net/ethernet/mediatek/mtk_star_emac.c | 75 ++++++++++++++++---
> 1 file changed, 64 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/net/ethernet/mediatek/mtk_star_emac.c b/drivers/net/ethernet/mediatek/mtk_star_emac.c
> index 7c2af775d601..403439782db9 100644
> --- a/drivers/net/ethernet/mediatek/mtk_star_emac.c
> +++ b/drivers/net/ethernet/mediatek/mtk_star_emac.c
> @@ -151,6 +151,7 @@ static const char *const mtk_star_clk_names[] = { "core", "reg", "trans" };
> #define MTK_STAR_REG_MAC_CLK_CONF 0x00ac
> #define MTK_STAR_MSK_MAC_CLK_CONF GENMASK(7, 0)
> #define MTK_STAR_BIT_CLK_DIV_10 0x0a
> +#define MTK_STAR_BIT_CLK_DIV_50 0x32
>
> /* Counter registers. */
> #define MTK_STAR_REG_C_RXOKPKT 0x0100
> @@ -183,9 +184,11 @@ static const char *const mtk_star_clk_names[] = { "core", "reg", "trans" };
> #define MTK_STAR_REG_C_RX_TWIST 0x0218
>
> /* Ethernet CFG Control */
> -#define MTK_PERICFG_REG_NIC_CFG_CON 0x03c4
> -#define MTK_PERICFG_MSK_NIC_CFG_CON_CFG_MII GENMASK(3, 0)
> -#define MTK_PERICFG_BIT_NIC_CFG_CON_RMII BIT(0)
> +#define MTK_PERICFG_REG_NIC_CFG0_CON 0x03c4
> +#define MTK_PERICFG_REG_NIC_CFG1_CON 0x03c8
> +#define MTK_PERICFG_REG_NIC_CFG_CON_V2 0x0c10
> +#define MTK_PERICFG_REG_NIC_CFG_CON_CFG_INTF GENMASK(3, 0)
> +#define MTK_PERICFG_BIT_NIC_CFG_CON_RMII 1
>
> /* Represents the actual structure of descriptors used by the MAC. We can
> * reuse the same structure for both TX and RX - the layout is the same, only
> @@ -234,6 +237,7 @@ struct mtk_star_ring {
> };
>
> struct mtk_star_compat {
> + int (*set_interface_mode)(struct net_device *ndev);
> unsigned char bit_clk_div;
> };
>
> @@ -909,13 +913,6 @@ static void mtk_star_init_config(struct mtk_star_priv *priv)
> priv->compat_data->bit_clk_div);
> }
>
> -static void mtk_star_set_mode_rmii(struct mtk_star_priv *priv)
> -{
> - regmap_update_bits(priv->pericfg, MTK_PERICFG_REG_NIC_CFG_CON,
> - MTK_PERICFG_MSK_NIC_CFG_CON_CFG_MII,
> - MTK_PERICFG_BIT_NIC_CFG_CON_RMII);
> -}
> -
> static int mtk_star_enable(struct net_device *ndev)
> {
> struct mtk_star_priv *priv = netdev_priv(ndev);
> @@ -1531,7 +1528,13 @@ static int mtk_star_probe(struct platform_device *pdev)
> return -ENODEV;
> }
>
> - mtk_star_set_mode_rmii(priv);
> + if (priv->compat_data->set_interface_mode) {
> + ret = priv->compat_data->set_interface_mode(ndev);
> + if (ret) {
> + dev_err(dev, "Failed to set phy interface, err = %d\n", ret);
> + return -EINVAL;
> + }
> + }

Shouldn't you still call mtk_star_set_mode_rmii(priv) if there's no callback?

>
> ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
> if (ret) {
> @@ -1564,10 +1567,58 @@ static int mtk_star_probe(struct platform_device *pdev)
> return devm_register_netdev(dev, ndev);
> }
>
> +static int mt8516_set_interface_mode(struct net_device *ndev)
> +{
> + struct mtk_star_priv *priv = netdev_priv(ndev);
> + struct device *dev = mtk_star_get_dev(priv);
> + unsigned int intf_val = 0;

No need to initialize.

> +
> + switch (priv->phy_intf) {
> + case PHY_INTERFACE_MODE_RMII:
> + intf_val = MTK_PERICFG_BIT_NIC_CFG_CON_RMII;
> + break;
> + default:
> + dev_err(dev, "This interface not supported\n");
> + return -EINVAL;
> + }
> +
> + regmap_update_bits(priv->pericfg, MTK_PERICFG_REG_NIC_CFG0_CON,
> + MTK_PERICFG_REG_NIC_CFG_CON_CFG_INTF,
> + intf_val);
> + return 0;

You can directly return regmap_update_bits().

> +}
> +
> +static int mt8365_set_interface_mode(struct net_device *ndev)
> +{
> + struct mtk_star_priv *priv = netdev_priv(ndev);
> + struct device *dev = mtk_star_get_dev(priv);
> + unsigned int intf_val = 0;
> +
> + switch (priv->phy_intf) {
> + case PHY_INTERFACE_MODE_RMII:
> + intf_val = MTK_PERICFG_BIT_NIC_CFG_CON_RMII;
> + break;
> + default:
> + dev_err(dev, "This interface not supported\n");
> + return -EINVAL;
> + }
> +
> + regmap_update_bits(priv->pericfg, MTK_PERICFG_REG_NIC_CFG_CON_V2,
> + MTK_PERICFG_REG_NIC_CFG_CON_CFG_INTF,
> + intf_val);
> + return 0;
> +}

Same as above.

> +
> static struct mtk_star_compat mtk_star_mt8516_compat = {
> + .set_interface_mode = mt8516_set_interface_mode,
> .bit_clk_div = MTK_STAR_BIT_CLK_DIV_10,
> };
>
> +static struct mtk_star_compat mtk_star_mt8365_compat = {
> + .set_interface_mode = mt8365_set_interface_mode,
> + .bit_clk_div = MTK_STAR_BIT_CLK_DIV_50,
> +};
> +
> static const struct of_device_id mtk_star_of_match[] = {
> { .compatible = "mediatek,mt8516-eth",
> .data = &mtk_star_mt8516_compat },
> @@ -1575,6 +1626,8 @@ static const struct of_device_id mtk_star_of_match[] = {
> .data = &mtk_star_mt8516_compat },
> { .compatible = "mediatek,mt8175-eth",
> .data = &mtk_star_mt8516_compat },
> + { .compatible = "mediatek,mt8365-eth",
> + .data = &mtk_star_mt8365_compat },
> { }
> };
> MODULE_DEVICE_TABLE(of, mtk_star_of_match);
> --
> 2.25.1
>

Bart

\
 
 \ /
  Last update: 2022-01-25 11:35    [W:0.113 / U:0.324 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site