lkml.org 
[lkml]   [2022]   [Jan]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: earlyprintk=xdbc seems broken
Date
On 24.1.2022 18.46, Peter Zijlstra wrote:
> On Mon, Jan 24, 2022 at 05:39:08PM +0100, Peter Zijlstra wrote:
>> On Mon, Jan 24, 2022 at 04:55:22PM +0200, Mathias Nyman wrote:
>>>
>>>> [ 0.000000] xhci_dbc:early_xdbc_parse_parameter: dbgp_num: 0
>>>> [ 4.984106] xhci_dbc:xdbc_start: waiting for connection timed out, DCPORTSC:0xa0
>>>> [ 9.946159] xhci_dbc:xdbc_start: waiting for connection timed out, DCPORTSC:0xa0
>>>> [ 9.946163] xhci_dbc:early_xdbc_setup_hardware: failed to setup the connection to host
>>>>
>>>> [ 12.818364] xhci_hcd 0000:00:0d.0: xHCI Host Controller
>>>> [ 12.818373] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1
>>>> [ 12.820360] xhci_hcd 0000:00:0d.0: xHCI Host Controller
>>>> [ 12.820363] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2
>>>> [ 12.821036] xhci_hcd 0000:00:14.0: xHCI Host Controller
>>>> [ 12.821040] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
>>>> [ 12.823451] xhci_hcd 0000:00:14.0: xHCI Host Controller
>>>> [ 12.823453] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
>>>> [ 17.115089] usb usb4-port4: Cannot enable. Maybe the USB cable is bad?
>>>> [ 17.115163] usb usb4-port4: config error
>>>
>>> Ok, I see it now.
>>> Your setup has two xhci controllers, earlypringk=dbc enables dbc on the first xhci
>>> it finds, which would be at 0000:00:0d.0.
>>> Your cable is connected to the second xhci host at 0000:00:14.0
>>>
>>> does using "earlyprintk=xdbc1" work?
>>
>> Very quick testing says it don't work.. but I'll try again later, need
>> to go cook dinner now.
>
> FYI, I'm thinking early_xdbc_parse_parameter should've now given
> dpgp_num: 1 ?
>

Yes, it should.

Looks like there's a parsing issue.
"earlyprintk=xdbc1,keep" fails on our Tigerlake as well.

Without the "keep" option it works for me:

[ 0.000000] Command line: console=ttyS0,115200n8 buildroot_hostname=tgl04 earlyprintk=xdbc1 dmi_entry_point=0x74374000
[ 0.000000] xhci_dbc:early_xdbc_parse_parameter: dbgp_num: 1

-Mathias

\
 
 \ /
  Last update: 2022-01-25 09:56    [W:0.085 / U:0.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site