lkml.org 
[lkml]   [2022]   [Jan]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 10/15] drivers: clk: qcom: gcc-ipq806x: add additional freq for sdc table
From
Date
Quoting Ansuel Smith (2022-01-25 13:03:52)
> On Tue, Jan 25, 2022 at 12:45:53PM -0800, Stephen Boyd wrote:
> > Quoting Ansuel Smith (2022-01-21 13:03:35)
> > > Add additional freq supported for the sdc table.
> > >
> > > Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
> > > ---
> > > drivers/clk/qcom/gcc-ipq806x.c | 1 +
> > > 1 file changed, 1 insertion(+)
> > >
> > > diff --git a/drivers/clk/qcom/gcc-ipq806x.c b/drivers/clk/qcom/gcc-ipq806x.c
> > > index 77bc3d94f580..dbd61e4844b0 100644
> > > --- a/drivers/clk/qcom/gcc-ipq806x.c
> > > +++ b/drivers/clk/qcom/gcc-ipq806x.c
> > > @@ -1292,6 +1292,7 @@ static const struct freq_tbl clk_tbl_sdc[] = {
> > > { 20210000, P_PLL8, 1, 1, 19 },
> > > { 24000000, P_PLL8, 4, 1, 4 },
> > > { 48000000, P_PLL8, 4, 1, 2 },
> > > + { 52000000, P_PLL8, 1, 2, 15 }, /* 51.2 Mhz */
> >
> > Why the comment and fake rate? Can it be 51200000 instead and drop the
> > comment?
>
> I will add the related reason in the commit.
>
> We cannot achieve exact 52Mhz(jitter free) clock using PLL8.
> As per the MND calculator the closest possible jitter free clock
> using PLL8 is 51.2Mhz. This patch adds the values, which will provide
> jitter free 51.2Mhz when the requested frequency is 52mhz.

Sounds like this clk should use the round down clk_ops instead of the
round up ones. Then the actual frequency can be in the table.

\
 
 \ /
  Last update: 2022-01-25 23:21    [W:0.073 / U:0.972 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site