lkml.org 
[lkml]   [2022]   [Jan]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 5.15 088/846] clk: bcm-2835: Remove rounding up the dividers
    Date
    From: Maxime Ripard <maxime@cerno.tech>

    [ Upstream commit 8ca011ef4af48a7af7b15afd8a4a44039dd04cea ]

    The driver, once it found a divider, tries to round it up by increasing
    the least significant bit of the fractional part by one when the
    round_up argument is set and there's a remainder.

    However, since it increases the divider it will actually reduce the
    clock rate below what we were asking for, leading to issues with
    clk_set_min_rate() that will complain that our rounded clock rate is
    below the minimum of the rate.

    Since the dividers are fairly precise already, let's remove that part so
    that we can have clk_set_min_rate() working.

    This is effectively a revert of 9c95b32ca093 ("clk: bcm2835: add a round
    up ability to the clock divisor").

    Fixes: 9c95b32ca093 ("clk: bcm2835: add a round up ability to the clock divisor")
    Signed-off-by: Maxime Ripard <maxime@cerno.tech>
    Acked-by: Stephen Boyd <sboyd@kernel.org>
    Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
    Tested-by: Nicolas Saenz Julienne <nsaenz@kernel.org> # boot and basic functionality
    Tested-by: Michael Stapelberg <michael@stapelberg.ch>
    Link: https://patchwork.freedesktop.org/patch/msgid/20210922125419.4125779-3-maxime@cerno.tech
    Signed-off-by: Sasha Levin <sashal@kernel.org>
    ---
    drivers/clk/bcm/clk-bcm2835.c | 11 +++--------
    1 file changed, 3 insertions(+), 8 deletions(-)

    diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c
    index bf97b2b2a63f8..3667b4d731e71 100644
    --- a/drivers/clk/bcm/clk-bcm2835.c
    +++ b/drivers/clk/bcm/clk-bcm2835.c
    @@ -932,8 +932,7 @@ static int bcm2835_clock_is_on(struct clk_hw *hw)

    static u32 bcm2835_clock_choose_div(struct clk_hw *hw,
    unsigned long rate,
    - unsigned long parent_rate,
    - bool round_up)
    + unsigned long parent_rate)
    {
    struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
    const struct bcm2835_clock_data *data = clock->data;
    @@ -945,10 +944,6 @@ static u32 bcm2835_clock_choose_div(struct clk_hw *hw,

    rem = do_div(temp, rate);
    div = temp;
    -
    - /* Round up and mask off the unused bits */
    - if (round_up && ((div & unused_frac_mask) != 0 || rem != 0))
    - div += unused_frac_mask + 1;
    div &= ~unused_frac_mask;

    /* different clamping limits apply for a mash clock */
    @@ -1079,7 +1074,7 @@ static int bcm2835_clock_set_rate(struct clk_hw *hw,
    struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
    struct bcm2835_cprman *cprman = clock->cprman;
    const struct bcm2835_clock_data *data = clock->data;
    - u32 div = bcm2835_clock_choose_div(hw, rate, parent_rate, false);
    + u32 div = bcm2835_clock_choose_div(hw, rate, parent_rate);
    u32 ctl;

    spin_lock(&cprman->regs_lock);
    @@ -1130,7 +1125,7 @@ static unsigned long bcm2835_clock_choose_div_and_prate(struct clk_hw *hw,

    if (!(BIT(parent_idx) & data->set_rate_parent)) {
    *prate = clk_hw_get_rate(parent);
    - *div = bcm2835_clock_choose_div(hw, rate, *prate, true);
    + *div = bcm2835_clock_choose_div(hw, rate, *prate);

    *avgrate = bcm2835_clock_rate_from_divisor(clock, *prate, *div);

    --
    2.34.1


    \
     
     \ /
      Last update: 2022-01-24 23:10    [W:2.858 / U:0.040 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site