lkml.org 
[lkml]   [2022]   [Jan]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: kernel crash/disc errors when unbinding USB devices
From
On 1/23/22 13:33, Greg Kroah-Hartman wrote:
> On Sun, Jan 23, 2022 at 12:59:21PM +0100, Helge Deller wrote:
>> On 1/23/22 12:07, Greg Kroah-Hartman wrote:
>>> On Sun, Jan 23, 2022 at 11:40:01AM +0100, Helge Deller wrote:
>>>> On all kernels 5.15.x and 5.16.x I noticed that resetting
>>>> the USB devices with this shell script:
>>>>
>>>> for i in $(ls /sys/bus/pci/drivers/ahci/|grep :)
>>>> do
>>>> echo $i
>>>> echo $i >/sys/bus/pci/drivers/ahci/unbind
>>>> sleep 1
>>>> echo $i >/sys/bus/pci/drivers/ahci/bind
>>>> done
>>>
>>> That is dangerous to do, why do this? All of your block devices might
>>> have disappeard.
>>>
>>>> # reseting USB3 ports (if there none you'll get errors)
>>>> for i in $(ls /sys/bus/pci/drivers/xhci_hcd/|grep :)
>>>> do
>>>> echo $i
>>>> echo $i >/sys/bus/pci/drivers/xhci_hcd/unbind
>>>> sleep 1
>>>> echo $i >/sys/bus/pci/drivers/xhci_hcd/bind
>>>> done
>>>
>>> Again, why do this at all?
>>
>> I need to reset some of the USB devices after a suspend/resume cycle.
>
> The devices, or the host controllers? They are different things.
>
>> The problem is, that some of the USB devices are
>> handed over into a running VirtualBox VM and after
>> the suspend/resume they need to be virtually plugged out/in
>> so that the running Windows VM will reconnect them.
>
> unbind/bind is a very harsh way of doing this. but do it on the USB
> devics, not the host controllers.
>
>> If you search in the internet, you will find many places
>> where this unbind/bind process is mentioned, e.g.:
>> https://askubuntu.com/questions/645/how-do-you-reset-a-usb-device-from-the-command-line
>> This procedure did worked in the past.
>
> Never trust the internet :)
>
> But note, there is a usbreset program mentioned there, which is part of
> 'usbutils' and should already be installed on your machine. Why not
> just use that?
>
>> I think the main problem is, that it's somehow unexpected that
>> the SATA controllers are logically attached to the USB
>> controllers.
>
> Huh? No they are not.
>
> 'ahci' is a SATA controller.
> 'xhci' is a USB controller.
>
> Two totally different things.

Right, and that was my fault.
I mixed up "ahci" and "ehci" (the USB2.0 controller).

So, my report was bogus.
Please ignore.

Helge

\
 
 \ /
  Last update: 2022-01-23 14:08    [W:0.051 / U:0.288 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site