lkml.org 
[lkml]   [2022]   [Jan]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V3 03/10] soc: imx: imx8m-blk-ctrl: add i.MX8MQ VPU blk-ctrl
Date
From: Lucas Stach <l.stach@pengutronix.de>

This adds the necessary bits to drive the VPU blk-ctrl on the i.MX8MQ, to
avoid putting more of this functionality into the decoder driver.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Adam Ford <aford173@gmail.com>

diff --git a/drivers/soc/imx/imx8m-blk-ctrl.c b/drivers/soc/imx/imx8m-blk-ctrl.c
index 511e74f0db8a..122f9c884b38 100644
--- a/drivers/soc/imx/imx8m-blk-ctrl.c
+++ b/drivers/soc/imx/imx8m-blk-ctrl.c
@@ -15,6 +15,7 @@

#include <dt-bindings/power/imx8mm-power.h>
#include <dt-bindings/power/imx8mn-power.h>
+#include <dt-bindings/power/imx8mq-power.h>

#define BLK_SFT_RSTN 0x0
#define BLK_CLK_EN 0x4
@@ -589,6 +590,68 @@ static const struct imx8m_blk_ctrl_data imx8mn_disp_blk_ctl_dev_data = {
.num_domains = ARRAY_SIZE(imx8mn_disp_blk_ctl_domain_data),
};

+static int imx8mq_vpu_power_notifier(struct notifier_block *nb,
+ unsigned long action, void *data)
+{
+ struct imx8m_blk_ctrl *bc = container_of(nb, struct imx8m_blk_ctrl,
+ power_nb);
+
+ if (action != GENPD_NOTIFY_ON && action != GENPD_NOTIFY_PRE_OFF)
+ return NOTIFY_OK;
+
+ /*
+ * The ADB in the VPUMIX domain has no separate reset and clock
+ * enable bits, but is ungated and reset together with the VPUs. The
+ * reset and clock enable inputs to the ADB is a logical OR of the
+ * VPU bits. In order to set the G2 fuse bits, the G2 clock must
+ * also be enabled.
+ */
+ regmap_set_bits(bc->regmap, BLK_SFT_RSTN, BIT(0) | BIT(1));
+ regmap_set_bits(bc->regmap, BLK_CLK_EN, BIT(0) | BIT(1));
+
+ if (action == GENPD_NOTIFY_ON) {
+ /*
+ * On power up we have no software backchannel to the GPC to
+ * wait for the ADB handshake to happen, so we just delay for a
+ * bit. On power down the GPC driver waits for the handshake.
+ */
+ udelay(5);
+
+ /* set "fuse" bits to enable the VPUs */
+ regmap_set_bits(bc->regmap, 0x8, 0xffffffff);
+ regmap_set_bits(bc->regmap, 0xc, 0xffffffff);
+ regmap_set_bits(bc->regmap, 0x10, 0xffffffff);
+ }
+
+ return NOTIFY_OK;
+}
+
+static const struct imx8m_blk_ctrl_domain_data imx8mq_vpu_blk_ctl_domain_data[] = {
+ [IMX8MQ_VPUBLK_PD_G1] = {
+ .name = "vpublk-g1",
+ .clk_names = (const char *[]){ "g1", },
+ .num_clks = 1,
+ .gpc_name = "g1",
+ .rst_mask = BIT(1),
+ .clk_mask = BIT(1),
+ },
+ [IMX8MQ_VPUBLK_PD_G2] = {
+ .name = "vpublk-g2",
+ .clk_names = (const char *[]){ "g2", },
+ .num_clks = 1,
+ .gpc_name = "g2",
+ .rst_mask = BIT(0),
+ .clk_mask = BIT(0),
+ },
+};
+
+static const struct imx8m_blk_ctrl_data imx8mq_vpu_blk_ctl_dev_data = {
+ .max_reg = 0x14,
+ .power_notifier_fn = imx8mq_vpu_power_notifier,
+ .domains = imx8mq_vpu_blk_ctl_domain_data,
+ .num_domains = ARRAY_SIZE(imx8mq_vpu_blk_ctl_domain_data),
+};
+
static const struct of_device_id imx8m_blk_ctrl_of_match[] = {
{
.compatible = "fsl,imx8mm-vpu-blk-ctrl",
@@ -599,6 +662,9 @@ static const struct of_device_id imx8m_blk_ctrl_of_match[] = {
}, {
.compatible = "fsl,imx8mn-disp-blk-ctrl",
.data = &imx8mn_disp_blk_ctl_dev_data
+ }, {
+ .compatible = "fsl,imx8mq-vpu-blk-ctrl",
+ .data = &imx8mq_vpu_blk_ctl_dev_data
}, {
/* Sentinel */
}
--
2.32.0
\
 
 \ /
  Last update: 2022-01-24 03:32    [W:0.097 / U:0.416 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site