lkml.org 
[lkml]   [2022]   [Jan]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V3 10/10] arm64: dts: imx8mm: Enable Hantro G1 and G2 video decoders
Date
There are two decoders on the i.MX8M Mini controlled by the
vpu-blk-ctrl. The G1 supports H264 and VP8 while the
G2 support HEVC and VP9.

Signed-off-by: Adam Ford <aford173@gmail.com>

diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index 0c7a72c51a31..98aec4421713 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -1272,6 +1272,22 @@ gpu_2d: gpu@38008000 {
power-domains = <&pgc_gpu>;
};

+ vpu_g1: video-codec@38300000 {
+ compatible = "nxp,imx8mm-vpu-g1";
+ reg = <0x38300000 0x10000>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_VPU_G1_ROOT>;
+ power-domains = <&vpu_blk_ctrl IMX8MM_VPUBLK_PD_G1>;
+ };
+
+ vpu_g2: video-codec@38310000 {
+ compatible = "nxp,imx8mq-vpu-g2";
+ reg = <0x38310000 0x10000>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_VPU_G2_ROOT>;
+ power-domains = <&vpu_blk_ctrl IMX8MM_VPUBLK_PD_G2>;
+ };
+
vpu_blk_ctrl: blk-ctrl@38330000 {
compatible = "fsl,imx8mm-vpu-blk-ctrl", "syscon";
reg = <0x38330000 0x100>;
@@ -1282,6 +1298,12 @@ vpu_blk_ctrl: blk-ctrl@38330000 {
<&clk IMX8MM_CLK_VPU_G2_ROOT>,
<&clk IMX8MM_CLK_VPU_H1_ROOT>;
clock-names = "g1", "g2", "h1";
+ assigned-clocks = <&clk IMX8MM_CLK_VPU_G1>,
+ <&clk IMX8MM_CLK_VPU_G2>;
+ assigned-clock-parents = <&clk IMX8MM_VPU_PLL_OUT>,
+ <&clk IMX8MM_VPU_PLL_OUT>;
+ assigned-clock-rates = <600000000>,
+ <600000000>;
#power-domain-cells = <1>;
};

--
2.32.0
\
 
 \ /
  Last update: 2022-01-24 03:32    [W:0.662 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site