lkml.org 
[lkml]   [2022]   [Jan]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v3] thermal/core: Clear all mitigation when thermal zone is disabled
Date
On Sun, 2022-01-23 at 21:51 +0100, Daniel Lezcano wrote:
>
> Hi Manaf,
>
> semantically speaking disabling a thermal zone would be to detach the
> thermal zone from its governor and stop the monitoring.
>
> May be add the functions
>
>  - thermal_governor_attach(struct thermal_zone_device *tzd)
>    {
>         ...
>         if (tz->governor && tz->governor->bind_to_tz) {
>                 if (tz->governor->bind_to_tz(tz)) {
>         }
>         ...
>    }
>
>  - thermal_governor_detach(struct thermal_zone_device *tzd)
>    {
>         ...
>         if (tz->governor && tz->governor->unbind_from_tz)
>                 tz->governor->unbind_from_tz(tz);
>         ...
>    }
>
> And add in the step_wise and power_allocator the reset of the
> governor's
> data as well as the cooling device instances in the unbind_from_tz()
> callback
>
> Then, thermal_zone_device_enable() attaches and
> thermal_zone_device_disable() detaches the governor.
>
> Does it make sense ?
This is better.

Thanks,
Srinivas

>
>
> On 07/01/2022 19:56, Manaf Meethalavalappu Pallikunhi wrote:
> > Whenever a thermal zone is in trip violated state, there is a
> > chance
> > that the same thermal zone mode can be disabled either via thermal
> > core API or via thermal zone sysfs. Once it is disabled, the
> > framework
> > bails out any re-evaluation of thermal zone. It leads to a case
> > where
> > if it is already in mitigation state, it will stay the same state
> > until it is re-enabled.
> >
> > To avoid above mentioned issue, on thermal zone disable request
> > reset thermal zone and clear mitigation for each trip explicitly.
> >
> > Signed-off-by: Manaf Meethalavalappu Pallikunhi
> > <quic_manafm@quicinc.com>
> > ---
> >  drivers/thermal/thermal_core.c | 12 ++++++++++--
> >  1 file changed, 10 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/thermal/thermal_core.c
> > b/drivers/thermal/thermal_core.c
> > index 51374f4..e288c82 100644
> > --- a/drivers/thermal/thermal_core.c
> > +++ b/drivers/thermal/thermal_core.c
> > @@ -447,10 +447,18 @@ static int
> > thermal_zone_device_set_mode(struct thermal_zone_device *tz,
> >  
> >         thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
> >  
> > -       if (mode == THERMAL_DEVICE_ENABLED)
> > +       if (mode == THERMAL_DEVICE_ENABLED) {
> >                 thermal_notify_tz_enable(tz->id);
> > -       else
> > +       } else {
> > +               int trip;
> > +
> > +               /* make sure all previous throttlings are cleared
> > */
> > +               thermal_zone_device_init(tz);
> > +               for (trip = 0; trip < tz->trips; trip++)
> > +                       handle_thermal_trip(tz, trip);
> > +
> >                 thermal_notify_tz_disable(tz->id);
> > +       }
> >  
> >         return ret;
> >  }
> >
>
>

\
 
 \ /
  Last update: 2022-01-24 02:06    [W:0.099 / U:0.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site