lkml.org 
[lkml]   [2022]   [Jan]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v3 2/3] dt-bindings: pwm: Document clk based PWM controller
From
On 21/01/2022 22:34, Sean Anderson wrote:
>
>
> On 1/21/22 2:34 AM, Krzysztof Kozlowski wrote:
>> On Thu, 20 Jan 2022 at 17:15, Nikita Travkin <nikita@trvn.ru> wrote:
>>>
>>> Add YAML devicetree binding for clk based PWM controller
>>>
>>> Signed-off-by: Nikita Travkin <nikita@trvn.ru>
>>> --
>>> Changes in v2:
>>> - fix the file name.
>>> ---
>>> .../devicetree/bindings/pwm/clk-pwm.yaml | 45 +++++++++++++++++++
>>> 1 file changed, 45 insertions(+)
>>> create mode 100644 Documentation/devicetree/bindings/pwm/clk-pwm.yaml
>>>
>>> diff --git a/Documentation/devicetree/bindings/pwm/clk-pwm.yaml b/Documentation/devicetree/bindings/pwm/clk-pwm.yaml
>>> new file mode 100644
>>> index 000000000000..4fb2c1baaad4
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/pwm/clk-pwm.yaml
>>> @@ -0,0 +1,45 @@
>>> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
>>> +%YAML 1.2
>>> +---
>>> +$id: http://devicetree.org/schemas/pwm/clk-pwm.yaml#
>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>> +
>>> +title: Clock based PWM controller
>>> +
>>> +maintainers:
>>> + - Nikita Travkin <nikita@trvn.ru>
>>> +
>>> +description: |
>>> + Some systems have clocks that can be exposed to external devices.
>>> + (e.g. by muxing them to GPIO pins)
>>> + It's often possible to control duty-cycle of such clocks which makes them
>>> + suitable for generating PWM signal.
>>> +
>>> +allOf:
>>> + - $ref: pwm.yaml#
>>> +
>>> +properties:
>>> + compatible:
>>> + const: clk-pwm
>>> +
>>> + clocks:
>>> + description: Clock used to generate the signal.
>>> + maxItems: 1
>>> +
>>> + "#pwm-cells":
>>> + const: 2
>>> +
>>> +unevaluatedProperties: false
>>> +
>>> +required:
>>> + - clocks
>>> +
>>> +examples:
>>> + - |
>>> + pwm-flash {
>>
>> Node names should be generic (see devicetree specification), so just "pwm".
>
> And then what will you do if you have two clock-based pwms?

The same as we do with fixed clocks, keys and so on:
pwm-0
pwm-1
pwm-2

A descriptive suffix also appears, but there is no justification to use
it here. There is only one node in the example.


Best regards,
Krzysztof

\
 
 \ /
  Last update: 2022-01-22 11:14    [W:0.047 / U:0.760 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site