lkml.org 
[lkml]   [2022]   [Jan]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v14 0/3] mmc: Add LiteSDCard mmc driver
On Thu, Jan 13, 2022 at 12:02:57PM -0500, Gabriel Somlo wrote:
> Add support for the LiteX SD-Card device, LiteSDCard.
>
> LiteSDCard is a simple SD-Card interface available as part of the LiteX
> environment, used with various RISC-V and other FPGA based SoCs.
>
> New in v14:
> Documentation/devicetree/bindings/mmc/litex,mmc.yaml:
> - add missing `vmmc-supply = ...` property to example section
>
> >New in v13:
> >Documentation/devicetree/bindings/mmc/litex,mmc.yaml:
> > - add `vmmc-supply` requirement
> >drivers/mmc/host/Kconfig:
> > - add dependency on REGULATOR, REGULATOR_FIXED_VOLTAGE
> >drivers/mmc/host/litex_mmc.c:
> > - use `mmc_regulator_get_supply()`, with fallback to hardcoded 3.3V


Ping?


> >>New in v12:
> >>drivers/mmc/host/Kconfig:
> >> - add dependency on HAVE_CLK for litex_mmc driver
> >> - (re)add "If unsure, say N" to the litex_mmc driver help message
> >>drivers/mmc/host/litex_mmc.c:
> >> - prints message using dev_info() before returning success from probe()
> >>
> >>>New in v11:
> >>> - picked up r/b from Andy
> >>>drivers/mmc/host/litex_mmc.c:
> >>> - defensive coding of litex_mmc_interrupt() return logic
> >>> - remove `dev` member of `struct litex_mmc_host`, only used during probe
> >>>
> >>>>New in v10:
> >>>>drivers/mmc/host/litex_mmc.c:
> >>>> - group `linux/mmc/*` includes by themselves
> >>>> - clean-up of `return` style (multiple locations throughout source)
> >>>> - create `mmc_free_host()` wrapper for use with
> >>>> `devm_add_action_or_reset()`
> >>>> - use GFP_KERNEL with `dmam_alloc_coherent()`
> >>>>
> >>>>>New in v9:
> >>>>>drivers/mmc/host/Kconfig:
> >>>>> - fix OF dependency
> >>>>>drivers/mmc/host/litex_mmc.c:
> >>>>> - remove `linux/of.h` include, no longer needed since dropping
> >>>>> `of_match_ptr()`
> >>>>> - add `linux/mod_devicetable.h` include
> >>>>> - use devm_action_or_reset() to devm-ify mmc_alloc_host(), and obviate
> >>>>> the need to call mmc_free_host() explicitly during either probe()
> >>>>> error path or during remove()
> >>>>>
> >>>>>>New in v8:
> >>>>>>commit blurbs:
> >>>>>> - cosmetic editing of descriptions
> >>>>>> - removed `Cc:` lines
> >>>>>>drivers/mmc/host/litex_mmc.c:
> >>>>>> - fix file header comment (for real, this time)
> >>>>>> - add explicit `bits.h` include
> >>>>>> - remove `of_match_ptr()` wrapper from around .of_match_table argument
> >>>>>> - fix devm ordering issues: use `devm_request_irq()`, which precludes
> >>>>>> the need to call `free_irq()` on `probe()` error path or from `remove()`
> >>>>>>
> >>>>>>>New in v7:
> >>>>>>>
> >>>>>>>drivers/mmc/host/Kconfig:
> >>>>>>> - added module name in LiteSDCard Kconfig entry
> >>>>>>>
> >>>>>>>drivers/mmc/host/litex_mmc.c:
> >>>>>>> - fixed comment formatting, ordering, and capitalization throughout
> >>>>>>> the entire file
> >>>>>>> - sorted header #include statements
> >>>>>>> - removed redundant parantheses in readx_poll_timeout() condition
> >>>>>>> - explicit handling of readx_poll_timeout() timeout scenarios
> >>>>>>> - dev_err() used in litex_mmc_sdcard_wait_done()
> >>>>>>> - use memcpy_fromio() to grab command response
> >>>>>>> - no need to apply 0xffff mask to a 32-bit value right-shifted by 16
> >>>>>>> (host->resp[3])
> >>>>>>> - use clamp() instead of min(max(...)...)
> >>>>>>> - reworked platform_get_irq_optional() error handling logic
> >>>>>>> - no need to explicitly zero host->irq, kzalloc() does that already
> >>>>>>> - added missing free_irq() in litex_mmc_probe() error path
> >>>>>>> - reordered calls inside litex_mmc_remove() (calling mmc_free_host()
> >>>>>>> before free_irq()
> >>>>>>>
> >>>>>>>>New in v6:
> >>>>>>>>
> >>>>>>>>drivers/mmc/host/litex_mmc.c:
> >>>>>>>> - fix handling of deferred probe vs. platform_get_irq_optional()
> >>>>>>>> - don't #ifdef dma_set_mask_and_coherent(), since it automatically
> >>>>>>>> does the right thing on both 32- and 64-bit DMA capable arches
> >>>>>>>> - remove MMC_CAP2_FULL_PWR_CYCLE, add MMC_CAP2_NO_MMC to list of
> >>>>>>>> hardcoded capabilities during litex_mmc_probe()
> >>>>>>>> - hardcode mmc->ocr_avail to the full 2.7-3.6V range allowed by the
> >>>>>>>> SDCard spec (the LiteSDCard device doesn't accept software
> >>>>>>>> configuration)
> >>>>>>>>
> >>>>>>>>>New in v5:
> >>>>>>>>>
> >>>>>>>>>MAINTAINERS:
> >>>>>>>>>
> >>>>>>>>> - picked up a/b Mateusz
> >>>>>>>>>
> >>>>>>>>>Doc/dt/bindings/mmc/litex,mmc.yaml:
> >>>>>>>>>
> >>>>>>>>> - picked up r/b Rob, Joel
> >>>>>>>>>
> >>>>>>>>>drivers/mmc/host/litex_mmc.c:
> >>>>>>>>>
> >>>>>>>>> - shorten #define constant names (cosmetic, make them less unwieldy)
> >>>>>>>>> - picked up r/b Joel
> >>>>>>>>>
> >>>>>>>>>>New in v4:
> >>>>>>>>>>
> >>>>>>>>>>Doc/dt/bindings/mmc/litex,mmc.yaml:
> >>>>>>>>>>
> >>>>>>>>>> - fixed `dt_binding_check` errors uncovered by Rob's script
> >>>>>>>>>>
> >>>>>>>>>>drivers/mmc/host/litex_mmc.c:
> >>>>>>>>>>
> >>>>>>>>>> - struct litex_mmc_host fields re-ordered so that `pahole` reports
> >>>>>>>>>> no holes in either 32- or 64-bit builds
> >>>>>>>>>> - litex_mmc_set_bus_width() now encapsulates check for
> >>>>>>>>>> host->is_bus_width_set
> >>>>>>>>>> - litex_mmc_request() - factor out dma data setup into separate
> >>>>>>>>>> helper function: litex_mmc_do_dma()
> >>>>>>>>>>
> >>>>>>>>>>>New in v3:
> >>>>>>>>>>>
> >>>>>>>>>>> MAINTAINERS:
> >>>>>>>>>>>
> >>>>>>>>>>> - picked up acked-by Joel
> >>>>>>>>>>> - added listing for liteeth driver
> >>>>>>>>>>> - added Joel as additional co-maintainer (thanks!)
> >>>>>>>>>>>
> >>>>>>>>>>> Doc/dt/bindings/mmc/litex,mmc.yaml:
> >>>>>>>>>>>
> >>>>>>>>>>> - picked up r/b Geert Uytterhoeven <geert@linux-m68k.org> in DT
> >>>>>>>>>>> bindings document (please let me know if that was premature, and
> >>>>>>>>>>> happy to take further review if needed :)
> >>>>>>>>>>> - add dedicated DT property for source clock frequency
> >>>>>>>>>>>
> >>>>>>>>>>> drivers/mmc/host/litex_mmc.c:
> >>>>>>>>>>>
> >>>>>>>>>>> - fixed function signature (no line split), and naming (litex_mmc_*)
> >>>>>>>>>>> - more informative MODULE_AUTHOR() entries
> >>>>>>>>>>> - also added matching "Copyright" entries in file header
> >>>>>>>>>>> - fixed description in Kconfig
> >>>>>>>>>>> - fixed DT documentation
> >>>>>>>>>>> - removed magic constants
> >>>>>>>>>>> - removed litex_map_status(), have sdcard_wait_done() return *real*
> >>>>>>>>>>> error codes directly instead.
> >>>>>>>>>>> - streamlined litex_mmc_reponse_len()
> >>>>>>>>>>> - call litex_mmc_set_bus_width() only once, and ensure it returns
> >>>>>>>>>>> correct error code(s)
> >>>>>>>>>>> - use readx_poll_timeout() -- more concise -- instead of
> >>>>>>>>>>> read_poll_timeout()
> >>>>>>>>>>> - use dev_err() in litex_mmc_send_cmd() (instead of pr_err())
> >>>>>>>>>>> - litex_mmc_setclk() will update host->clock before returning
> >>>>>>>>>>> - separate irq initialization into its own function,
> >>>>>>>>>>> litex_mmc_irq_init()
> >>>>>>>>>>> - document rationale for f_min, f_max
> >>>>>>>>>>> - use dmam_alloc_coherent(), which simplifies cleanup significantly
> >>>>>>>>>>> - large `if (data) { ... }` block in litex_mmc_request() left as-is,
> >>>>>>>>>>> there are too many variables shared with the rest of the parent
> >>>>>>>>>>> function body to easily separate (e.g., `len`, `transfer`, `direct`).
> >>>>>>>>>>> If this is indeed a blocker, I can take another shot at refactoring
> >>>>>>>>>>> it in a future revision!
> >>>>>>>>>>> - bump dma_set_mask_and_coherent() to 64-bits on suitable
> >>>>>>>>>>> architectures
> >>>>>>>>>>> - clock source picked up from dedicated DT clock reference property
> >>>>>>>>>>> - remove gpio card-detect logic (needs testing and a dt binding
> >>>>>>>>>>> example before being eligible for upstream inclusion)
> >>>>>>>>>>>
> >>>>>>>>>>>> New in v2:
> >>>>>>>>>>>> - reword info message in litex_set_clk()
> >>>>>>>>>>>> - streamline code in litex_map_status()
> >>>>>>>>>>>> - fix typos in Kconfig (thanks Randy Dunlap <rdunlap@infradead.org>)
> >>>>>>>>>>>> - improvements suggested by Stafford Horne <shorne@gmail.com>
> >>>>>>>>>>>> - allow COMPILE_TEST in Kconfig
> >>>>>>>>>>>> - use read_poll_timeout() when waiting for cmd/data/DMA
> >>>>>>>>>>>> xfer completion
> >>>>>>>>>>>> - include interrupt.h (thanks kernel test robot <lkp@intel.com>)
>
> Gabriel Somlo (3):
> MAINTAINERS: co-maintain LiteX platform
> dt-bindings: mmc: Add bindings for LiteSDCard
> mmc: Add driver for LiteX's LiteSDCard interface
>
> .../devicetree/bindings/mmc/litex,mmc.yaml | 78 +++
> MAINTAINERS | 9 +-
> drivers/mmc/host/Kconfig | 13 +
> drivers/mmc/host/Makefile | 1 +
> drivers/mmc/host/litex_mmc.c | 661 ++++++++++++++++++
> 5 files changed, 760 insertions(+), 2 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/mmc/litex,mmc.yaml
> create mode 100644 drivers/mmc/host/litex_mmc.c
>
> --
> 2.31.1
>

\
 
 \ /
  Last update: 2022-01-21 14:44    [W:0.138 / U:0.488 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site