lkml.org 
[lkml]   [2022]   [Jan]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/9] regulator: rpi-panel: Support official Raspberry Pi 7 inches touchscreen
Date
This patchset provides different fixes to the rpi-panel-attiny-regulator driver.

This is a preparation patchset for supporting the official Raspberry Pi 7
inches touchscreen.

It has been tested with a Raspberry Pi 4 B and the official Raspberry Pi 7
inches touchscreen.

Dave Stevenson (9):
regulator: rpi-panel: Register with a unique backlight name
regulator: rpi-panel: Handle I2C errors/timing to the Atmel
regulator: rpi-panel: Serialise operations.
regulator: rpi-panel: Ensure the backlight is off during probe.
regulator: rpi-panel: Convert to drive lines directly
regulator: rpi-panel: Add GPIO control for panel and touch resets
regulator: rpi-panel: Remove get_brightness hook
regulator/rpi-panel-attiny: Don't read the LCD power status
regulator/rpi-panel-attiny: Use two transactions for I2C read

.../regulator/rpi-panel-attiny-regulator.c | 285 +++++++++++++++---
1 file changed, 236 insertions(+), 49 deletions(-)

--
2.34.1

\
 
 \ /
  Last update: 2022-01-20 16:23    [W:0.356 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site