lkml.org 
[lkml]   [2022]   [Jan]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v4 5/9] platform/x86: i2c-multi-instantiate: Rename it for a generic bus driver name
From
Hi,

On 1/20/22 14:43, Stefan Binding wrote:
> From: Lucas Tanure <tanureal@opensource.cirrus.com>
>
> Rename I2C multi instantiate driver to bus-multi-instantiate for
> upcoming addition of SPI support
>
> Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
> Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>

Thanks, patch looks good to me:

Reviewed-by: Hans de Goede <hdegoede@redhat.com>

Regards,

Hans


> ---
> MAINTAINERS | 4 +-
> drivers/acpi/scan.c | 2 +-
> drivers/platform/x86/Kconfig | 4 +-
> drivers/platform/x86/Makefile | 2 +-
> ...-instantiate.c => bus-multi-instantiate.c} | 89 +++++++++----------
> 5 files changed, 50 insertions(+), 51 deletions(-)
> rename drivers/platform/x86/{i2c-multi-instantiate.c => bus-multi-instantiate.c} (53%)
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 4e828542b089..4a7e3cff9245 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -388,11 +388,11 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
> S: Maintained
> F: drivers/acpi/arm64
>
> -ACPI I2C MULTI INSTANTIATE DRIVER
> +ACPI BUS MULTI INSTANTIATE DRIVER
> M: Hans de Goede <hdegoede@redhat.com>
> L: platform-driver-x86@vger.kernel.org
> S: Maintained
> -F: drivers/platform/x86/i2c-multi-instantiate.c
> +F: drivers/platform/x86/bus-multi-instantiate.c
>
> ACPI PCC(Platform Communication Channel) MAILBOX DRIVER
> M: Sudeep Holla <sudeep.holla@arm.com>
> diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
> index 1331756d4cfc..e4fda14572e7 100644
> --- a/drivers/acpi/scan.c
> +++ b/drivers/acpi/scan.c
> @@ -1738,7 +1738,7 @@ static bool acpi_device_enumeration_by_parent(struct acpi_device *device)
> * must be instantiated for each, each with its own i2c_device_id.
> * Normally we only instantiate an i2c-client for the first resource,
> * using the ACPI HID as id. These special cases are handled by the
> - * drivers/platform/x86/i2c-multi-instantiate.c driver, which knows
> + * drivers/platform/x86/bus-multi-instantiate.c driver, which knows
> * which i2c_device_id to use for each resource.
> */
> {"BSG1160", },
> diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
> index 24deeeb29af2..616da06aa6b9 100644
> --- a/drivers/platform/x86/Kconfig
> +++ b/drivers/platform/x86/Kconfig
> @@ -990,7 +990,7 @@ config TOPSTAR_LAPTOP
>
> If you have a Topstar laptop, say Y or M here.
>
> -config I2C_MULTI_INSTANTIATE
> +config BUS_MULTI_INSTANTIATE
> tristate "I2C multi instantiate pseudo device driver"
> depends on I2C && ACPI
> help
> @@ -999,7 +999,7 @@ config I2C_MULTI_INSTANTIATE
> for each device in the firmware-node.
>
> To compile this driver as a module, choose M here: the module
> - will be called i2c-multi-instantiate.
> + will be called bus-multi-instantiate.
>
> config MLX_PLATFORM
> tristate "Mellanox Technologies platform support"
> diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
> index c12a9b044fd8..b5852e3fbab1 100644
> --- a/drivers/platform/x86/Makefile
> +++ b/drivers/platform/x86/Makefile
> @@ -110,7 +110,7 @@ obj-$(CONFIG_TOPSTAR_LAPTOP) += topstar-laptop.o
>
> # Platform drivers
> obj-$(CONFIG_FW_ATTR_CLASS) += firmware_attributes_class.o
> -obj-$(CONFIG_I2C_MULTI_INSTANTIATE) += i2c-multi-instantiate.o
> +obj-$(CONFIG_BUS_MULTI_INSTANTIATE) += bus-multi-instantiate.o
> obj-$(CONFIG_MLX_PLATFORM) += mlx-platform.o
> obj-$(CONFIG_TOUCHSCREEN_DMI) += touchscreen_dmi.o
> obj-$(CONFIG_WIRELESS_HOTKEY) += wireless-hotkey.o
> diff --git a/drivers/platform/x86/i2c-multi-instantiate.c b/drivers/platform/x86/bus-multi-instantiate.c
> similarity index 53%
> rename from drivers/platform/x86/i2c-multi-instantiate.c
> rename to drivers/platform/x86/bus-multi-instantiate.c
> index 4956a1df5b90..982dfecfd27c 100644
> --- a/drivers/platform/x86/i2c-multi-instantiate.c
> +++ b/drivers/platform/x86/bus-multi-instantiate.c
> @@ -1,6 +1,6 @@
> // SPDX-License-Identifier: GPL-2.0+
> /*
> - * I2C multi-instantiate driver, pseudo driver to instantiate multiple
> + * Bus multi-instantiate driver, pseudo driver to instantiate multiple
> * i2c-clients from a single fwnode.
> *
> * Copyright 2018 Hans de Goede <hdegoede@redhat.com>
> @@ -21,29 +21,29 @@
> #define IRQ_RESOURCE_GPIO 1
> #define IRQ_RESOURCE_APIC 2
>
> -struct i2c_inst_data {
> +struct bmi_instance {
> const char *type;
> unsigned int flags;
> int irq_idx;
> };
>
> -struct i2c_multi_inst_data {
> - int num_clients;
> - struct i2c_client *clients[];
> +struct bmi {
> + int i2c_num;
> + struct i2c_client *i2c_devs[];
> };
>
> -static int i2c_multi_inst_probe(struct platform_device *pdev)
> +static int bmi_probe(struct platform_device *pdev)
> {
> - struct i2c_multi_inst_data *multi;
> - const struct i2c_inst_data *inst_data;
> struct i2c_board_info board_info = {};
> + const struct bmi_instance *inst;
> struct device *dev = &pdev->dev;
> struct acpi_device *adev;
> + struct bmi *bmi;
> char name[32];
> int i, ret;
>
> - inst_data = device_get_match_data(dev);
> - if (!inst_data) {
> + inst = device_get_match_data(dev);
> + if (!inst) {
> dev_err(dev, "Error ACPI match data is missing\n");
> return -ENODEV;
> }
> @@ -55,33 +55,32 @@ static int i2c_multi_inst_probe(struct platform_device *pdev)
> if (ret < 0)
> return ret;
>
> - multi = devm_kmalloc(dev, struct_size(multi, clients, ret), GFP_KERNEL);
> - if (!multi)
> + bmi = devm_kmalloc(dev, struct_size(bmi, i2c_devs, ret), GFP_KERNEL);
> + if (!bmi)
> return -ENOMEM;
>
> - multi->num_clients = ret;
> + bmi->i2c_num = ret;
>
> - for (i = 0; i < multi->num_clients && inst_data[i].type; i++) {
> + for (i = 0; i < bmi->i2c_num && inst[i].type; i++) {
> memset(&board_info, 0, sizeof(board_info));
> - strlcpy(board_info.type, inst_data[i].type, I2C_NAME_SIZE);
> - snprintf(name, sizeof(name), "%s-%s.%d", dev_name(dev),
> - inst_data[i].type, i);
> + strlcpy(board_info.type, inst[i].type, I2C_NAME_SIZE);
> + snprintf(name, sizeof(name), "%s-%s.%d", dev_name(dev), inst[i].type, i);
> board_info.dev_name = name;
> - switch (inst_data[i].flags & IRQ_RESOURCE_TYPE) {
> + switch (inst[i].flags & IRQ_RESOURCE_TYPE) {
> case IRQ_RESOURCE_GPIO:
> - ret = acpi_dev_gpio_irq_get(adev, inst_data[i].irq_idx);
> + ret = acpi_dev_gpio_irq_get(adev, inst[i].irq_idx);
> if (ret < 0) {
> dev_err(dev, "Error requesting irq at index %d: %d\n",
> - inst_data[i].irq_idx, ret);
> + inst[i].irq_idx, ret);
> goto error;
> }
> board_info.irq = ret;
> break;
> case IRQ_RESOURCE_APIC:
> - ret = platform_get_irq(pdev, inst_data[i].irq_idx);
> + ret = platform_get_irq(pdev, inst[i].irq_idx);
> if (ret < 0) {
> dev_dbg(dev, "Error requesting irq at index %d: %d\n",
> - inst_data[i].irq_idx, ret);
> + inst[i].irq_idx, ret);
> goto error;
> }
> board_info.irq = ret;
> @@ -90,48 +89,48 @@ static int i2c_multi_inst_probe(struct platform_device *pdev)
> board_info.irq = 0;
> break;
> }
> - multi->clients[i] = i2c_acpi_new_device(dev, i, &board_info);
> - if (IS_ERR(multi->clients[i])) {
> - ret = dev_err_probe(dev, PTR_ERR(multi->clients[i]),
> + bmi->i2c_devs[i] = i2c_acpi_new_device(dev, i, &board_info);
> + if (IS_ERR(bmi->i2c_devs[i])) {
> + ret = dev_err_probe(dev, PTR_ERR(bmi->i2c_devs[i]),
> "Error creating i2c-client, idx %d\n", i);
> goto error;
> }
> }
> - if (i < multi->num_clients) {
> + if (i < bmi->i2c_num) {
> dev_err(dev, "Error finding driver, idx %d\n", i);
> ret = -ENODEV;
> goto error;
> }
>
> - platform_set_drvdata(pdev, multi);
> + platform_set_drvdata(pdev, bmi);
> return 0;
>
> error:
> while (--i >= 0)
> - i2c_unregister_device(multi->clients[i]);
> + i2c_unregister_device(bmi->i2c_devs[i]);
>
> return ret;
> }
>
> -static int i2c_multi_inst_remove(struct platform_device *pdev)
> +static int bmi_remove(struct platform_device *pdev)
> {
> - struct i2c_multi_inst_data *multi = platform_get_drvdata(pdev);
> + struct bmi *bmi = platform_get_drvdata(pdev);
> int i;
>
> - for (i = 0; i < multi->num_clients; i++)
> - i2c_unregister_device(multi->clients[i]);
> + for (i = 0; i < bmi->i2c_num; i++)
> + i2c_unregister_device(bmi->i2c_devs[i]);
>
> return 0;
> }
>
> -static const struct i2c_inst_data bsg1160_data[] = {
> +static const struct bmi_instance bsg1160_data[] = {
> { "bmc150_accel", IRQ_RESOURCE_GPIO, 0 },
> { "bmc150_magn" },
> { "bmg160" },
> {}
> };
>
> -static const struct i2c_inst_data bsg2150_data[] = {
> +static const struct bmi_instance bsg2150_data[] = {
> { "bmc150_accel", IRQ_RESOURCE_GPIO, 0 },
> { "bmc150_magn" },
> /* The resources describe a 3th client, but it is not really there. */
> @@ -139,7 +138,7 @@ static const struct i2c_inst_data bsg2150_data[] = {
> {}
> };
>
> -static const struct i2c_inst_data int3515_data[] = {
> +static const struct bmi_instance int3515_data[] = {
> { "tps6598x", IRQ_RESOURCE_APIC, 0 },
> { "tps6598x", IRQ_RESOURCE_APIC, 1 },
> { "tps6598x", IRQ_RESOURCE_APIC, 2 },
> @@ -148,27 +147,27 @@ static const struct i2c_inst_data int3515_data[] = {
> };
>
> /*
> - * Note new device-ids must also be added to i2c_multi_instantiate_ids in
> + * Note new device-ids must also be added to bus_multi_instantiate_ids in
> * drivers/acpi/scan.c: acpi_device_enumeration_by_parent().
> */
> -static const struct acpi_device_id i2c_multi_inst_acpi_ids[] = {
> +static const struct acpi_device_id bmi_acpi_ids[] = {
> { "BSG1160", (unsigned long)bsg1160_data },
> { "BSG2150", (unsigned long)bsg2150_data },
> { "INT3515", (unsigned long)int3515_data },
> { }
> };
> -MODULE_DEVICE_TABLE(acpi, i2c_multi_inst_acpi_ids);
> +MODULE_DEVICE_TABLE(acpi, bmi_acpi_ids);
>
> -static struct platform_driver i2c_multi_inst_driver = {
> +static struct platform_driver bmi_driver = {
> .driver = {
> - .name = "I2C multi instantiate pseudo device driver",
> - .acpi_match_table = i2c_multi_inst_acpi_ids,
> + .name = "Bus multi instantiate pseudo device driver",
> + .acpi_match_table = bmi_acpi_ids,
> },
> - .probe = i2c_multi_inst_probe,
> - .remove = i2c_multi_inst_remove,
> + .probe = bmi_probe,
> + .remove = bmi_remove,
> };
> -module_platform_driver(i2c_multi_inst_driver);
> +module_platform_driver(bmi_driver);
>
> -MODULE_DESCRIPTION("I2C multi instantiate pseudo device driver");
> +MODULE_DESCRIPTION("Bus multi instantiate pseudo device driver");
> MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
> MODULE_LICENSE("GPL");
>

\
 
 \ /
  Last update: 2022-01-20 16:05    [W:0.234 / U:0.596 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site