lkml.org 
[lkml]   [2022]   [Jan]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] Bluetooth: Apply initial command workaround for more Intel chips
From
Hi, this is your Linux kernel regression tracker speaking.

Top-posting for once, to make this easy accessible to everyone.

Could the bluetooth maintainers please provide a status update? I wonder
if it's time to bring this regression to Linus attention, as it seems to
be an issue that hits quite a few users -- and at the same takes quite a
long time to get fixed for a issue where a patch with a workaround was
already proposed one and a half months ago.

Ciao, Thorsten

On 16.01.22 15:06, Paul Menzel wrote:
>
> Dear Takashi,
>
>
> Am 10.12.21 um 14:23 schrieb Takashi Iwai:
>> On Tue, 07 Dec 2021 17:14:02 +0100, Marcel Holtmann wrote:
>
>>>>> Thanks, so this seems depending on the hardware, maybe a subtle
>>>>> difference matters.  As far as I read the code changes, the workaround
>>>>> was applied in the past unconditionally, so it must be fairly safe
>>>>> even if the chip works as is.
>>>>>
>>>>> Or, for avoiding the unnecessarily application of the workaround,
>>>>> should it be changed as a fallback after the failure at the first
>>>>> try...?
>>>>
>>>> I don't know if this helps, but I started experiencing this same
>>>> issue ("hci0:
>>>> command 0xfc05 tx timeout") yesterday after a kernel upgrade.
>>>>
>>>> My controller is a different one:
>>>>
>>>>     8087:0025 Intel Corp. Wireless-AC 9260 Bluetooth Adapter
>>>>     ^^^^^^^^^
>>>>
>>>> I tried with different (older) versions of the v5.15.x kernel but
>>>> none worked.
>>>>
>>>> Now, this is the interesting (?) part: today, when I switched on the
>>>> computer
>>>> to keep testing, the bluetooth was *already* working once again.
>>>>
>>>> I have reviewed my bash history to try to figure out what is it that
>>>> I did, and
>>>> the only thing I see is that yesterday, before going to sleep, I did
>>>> a full
>>>> poweroff instead of a reset (which is what I used yesterday to try
>>>> different
>>>> kernels).
>>>>
>>>> This does not make any sense... but then I found this [1] post from
>>>> someone else
>>>> who experienced the same.
>>>>
>>>> Is there any reasonable explanation for this? Could this be the
>>>> reason why you
>>>> seem to have different results with the same controller (8087:0a2a)?
>>>
>>> we trying to figure out what went wrong here. This should be really
>>> only an
>>> issue on the really early Intel hardware like Wilkens Peak. However
>>> it seems
>>> it slipped into later parts now as well. We are investigating what
>>> happened >> and see if this can be fixed via a firmware update or if
>>> we really
> have to
>>> mark this hardware as having a broken boot loader.
>>
>> The upstream bugzilla indicates that 8087:0aa7 seems hitting the same
>> problem:
>>    https://bugzilla.kernel.org/show_bug.cgi?id=215167
>>
>> OTOH, on openSUSE Bugzilla, there has been a report that applying the
>> workaround for 8087:0026 may cause another issue about the reset
>> error, so the entry for 8087:0026 should be dropped.
>
> Can you confirm that commit 95655456e7ce (Bluetooth: btintel: Fix broken
> LED quirk for legacy ROM devices) [1] merged in the current Linux 5.17
> cycle this week fixed the issue?
>
>
> Kind regards,
>
> Paul
>
>
> [1]:
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=95655456e7cee858a23793f67025765b4c4c227b
>

\
 
 \ /
  Last update: 2022-01-20 15:27    [W:1.559 / U:0.312 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site