lkml.org 
[lkml]   [2022]   [Jan]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH 2/7] arm64: dts: ls1028a: move Mali DP500 node into /soc
Date


> -----Original Message-----
> From: Michael Walle <michael@walle.cc>
> Sent: Tuesday, August 31, 2021 9:40 PM
> To: linux-arm-kernel@lists.infradead.org; devicetree@vger.kernel.org; linux-
> kernel@vger.kernel.org
> Cc: Shawn Guo <shawnguo@kernel.org>; Leo Li <leoyang.li@nxp.com>; Rob
> Herring <robh+dt@kernel.org>; Vladimir Oltean <vladimir.oltean@nxp.com>;
> Michael Walle <michael@walle.cc>
> Subject: [PATCH 2/7] arm64: dts: ls1028a: move Mali DP500 node into /soc
>
> Move it inside the /soc subnode because it is part of the CCSR space.

I just noticed that the dp0_out label has been changed to dpi0_out besides the move. Is this an intentional change or a typo? If intentional we probably should mention it, otherwise we should change it back as it is breaking build for off-tree patch that uses the label.

>
> Signed-off-by: Michael Walle <michael@walle.cc>
> ---
> .../arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 41 ++++++++++---------
> 1 file changed, 21 insertions(+), 20 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> index 9a65a7118faa..92e4f004c1c2 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> @@ -793,6 +793,27 @@ QORIQ_CLK_PLL_DIV(16)>,
> clock-names = "wdog_clk", "apb_pclk";
> };
>
> + malidp0: display@f080000 {
> + compatible = "arm,mali-dp500";
> + reg = <0x0 0xf080000 0x0 0x10000>;
> + interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
> + <0 223 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "DE", "SE";
> + clocks = <&dpclk>,
> + <&clockgen QORIQ_CLK_HWACCEL 2>,
> + <&clockgen QORIQ_CLK_HWACCEL 2>,
> + <&clockgen QORIQ_CLK_HWACCEL 2>;
> + clock-names = "pxlclk", "mclk", "aclk", "pclk";
> + arm,malidp-output-port-lines = /bits/ 8 <8 8 8>;
> + arm,malidp-arqos-value = <0xd000d000>;
> +
> + port {
> + dpi0_out: endpoint {
> +
> + };
> + };
> + };
> +
> sai1: audio-controller@f100000 {
> #sound-dai-cells = <0>;
> compatible = "fsl,vf610-sai";
> @@ -1139,24 +1160,4 @@ ftm_alarm0: timer@2800000 {
> };
> };
>
> - malidp0: display@f080000 {
> - compatible = "arm,mali-dp500";
> - reg = <0x0 0xf080000 0x0 0x10000>;
> - interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
> - <0 223 IRQ_TYPE_LEVEL_HIGH>;
> - interrupt-names = "DE", "SE";
> - clocks = <&dpclk>,
> - <&clockgen QORIQ_CLK_HWACCEL 2>,
> - <&clockgen QORIQ_CLK_HWACCEL 2>,
> - <&clockgen QORIQ_CLK_HWACCEL 2>;
> - clock-names = "pxlclk", "mclk", "aclk", "pclk";
> - arm,malidp-output-port-lines = /bits/ 8 <8 8 8>;
> - arm,malidp-arqos-value = <0xd000d000>;
> -
> - port {
> - dp0_out: endpoint {
> -
> - };
> - };
> - };
> };
> --
> 2.30.2

\
 
 \ /
  Last update: 2022-01-20 09:07    [W:0.094 / U:0.332 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site