lkml.org 
[lkml]   [2022]   [Jan]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v4 2/3] dt-bindings: Add dma-channels for pdma device node
On Fri, Jan 21, 2022 at 2:51 AM Palmer Dabbelt <palmer@dabbelt.com> wrote:
>
> On Sun, 16 Jan 2022 17:35:27 PST (-0800), zong.li@sifive.com wrote:
> > Add dma-channels property, then we can determine how many channels there
> > by device tree, rather than statically defines it in PDMA driver
>
> Maybe "statically defining it" is better here?
>

Thanks for the correction, I would modify it in the next version.

> >
> > Signed-off-by: Zong Li <zong.li@sifive.com>
> > ---
> > .../devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml | 7 +++++++
> > 1 file changed, 7 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml b/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
> > index d32a71b975fe..3dbb8caefc17 100644
> > --- a/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
> > +++ b/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
> > @@ -34,6 +34,12 @@ properties:
> > minItems: 1
> > maxItems: 8
> >
> > + dma-channels:
> > + description: For backwards-compatible, the default value is 4
>
> Maybe "backwards-compatibility" is better here?

Thanks, let me change it in the next version together.

>
> > + minimum: 1
> > + maximum: 4
> > + default: 4
> > +
> > '#dma-cells':
> > const: 1
> >
> > @@ -50,6 +56,7 @@ examples:
> > dma@3000000 {
> > compatible = "sifive,fu540-c000-pdma";
>
> IMO we should have a "sifive,pdma-1.0.0" (or whatever the versioning
> scheme ended up being) here, in addition to the SOC-specific DT entry.
> It's kind of odd to start extending the SOC-specific DT entry, as the
> whole idea there is to let us have an out in case we find future
> compatibility issues.

yes, I notice that we usually have a entry with the version in other
device nodes, such as "sifive,xxx0", I guess we should have a
"sifive,pdma0" there, thanks for your advice, let me add it and use it
in match table of pdma driver in the next version.

>
> > reg = <0x3000000 0x8000>;
> > + dma-channels = <4>;
> > interrupts = <23 24 25 26 27 28 29 30>;
> > #dma-cells = <1>;
> > };

\
 
 \ /
  Last update: 2022-01-21 02:59    [W:0.755 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site