lkml.org 
[lkml]   [2022]   [Jan]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] dt-bindings: qcom,pdc: convert to YAML
From
Hi Luca,

On 12/29/2021 3:11 PM, Luca Weiss wrote:
> Hi Maulik,
>
> On Mon Dec 20, 2021 at 1:24 PM CET, Maulik Shah wrote:
>> Hi Luca,
>>
>> On 12/13/2021 8:52 PM, Luca Weiss wrote:
>>> Convert the PDC interrupt controller bindings to YAML.
>>>
>>> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
>>> ---
>>> This patch depends on the following patch, which fixed sm8250 & sm8350
>>> compatibles and adds sm6350.
>>> https://lore.kernel.org/linux-arm-msm/20211213082614.22651-4-luca.weiss@fairphone.com/
>>>
>>> Also, if somebody has a better suggestion for the register names,
>>> the second one is pulled from downstream commit message which calls it
>>> both "SPI config registers" and "interface registers":
>>> https://source.codeaurora.org/quic/la/kernel/msm-4.19/commit/?id=cdefb63745e051a5bcf69663ac9d084d7da1eeec
>> Thanks for the patch. Please use "apss-shared-spi-cfg" name for the
>> second reg.
>>
>> It was intended in [1] to remove it since there are no user in upstream
>> for second reg. but it should be fine to convert existing to yaml first
>> and then look to fix that.
>>
> Do you have a full-text version of that? I'd use it instead of this in
> the binding.
>
> - description: PDC interface register region
you can use below description,

description: Edge or Level config register for SPI interrupts

Thanks,
Maulik

\
 
 \ /
  Last update: 2022-01-02 07:28    [W:0.082 / U:24.592 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site