lkml.org 
[lkml]   [2022]   [Jan]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 4/4] irqchip/meson-gpio: Add support for meson s4 SoCs
Date
The meson s4 SoCs support 12 gpio irq lines compared with previous
serial chips and have something different, details are as below.

IRQ Number:
- 80:68 13 pins on bank Z
- 67:48 20 pins on bank X
- 47:36 12 pins on bank H
- 35:24 12 pins on bank D
- 23:22 2 pins on bank E
- 21:14 8 pins on bank C
- 13:0 13 pins on bank B

Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
---
drivers/irqchip/irq-meson-gpio.c | 64 ++++++++++++++++++++++++++++++++
1 file changed, 64 insertions(+)

diff --git a/drivers/irqchip/irq-meson-gpio.c b/drivers/irqchip/irq-meson-gpio.c
index b511f9532adc..896201d2f01f 100644
--- a/drivers/irqchip/irq-meson-gpio.c
+++ b/drivers/irqchip/irq-meson-gpio.c
@@ -42,6 +42,9 @@
#define REG_PIN_SEL_SHIFT(x) (((x) % 4) * 8)
#define REG_FILTER_SEL_SHIFT(x) ((x) * 4)

+/* Used for s4 chips */
+#define REG_EDGE_POL_S4 0x1c
+
struct meson_gpio_irq_controller;
static void meson8_gpio_irq_sel_pin(struct meson_gpio_irq_controller *ctl,
unsigned int channel, unsigned long hwirq);
@@ -50,6 +53,8 @@ static void meson_a1_gpio_irq_sel_pin(struct meson_gpio_irq_controller *ctl,
unsigned int channel,
unsigned long hwirq);
static void meson_a1_gpio_irq_init(struct meson_gpio_irq_controller *ctl);
+static void meson_s4_gpio_irq_sel_type(struct meson_gpio_irq_controller *ctl,
+ unsigned int idx, u32 val);

struct irq_ctl_ops {
void (*gpio_irq_sel_pin)(struct meson_gpio_irq_controller *ctl,
@@ -95,6 +100,20 @@ struct meson_gpio_irq_params {
.pin_sel_mask = 0x7f, \
.nr_channels = 8, \

+#define INIT_MESON_S4_COMMON_DATA(irqs) \
+ .nr_hwirq = irqs, \
+ .ops = { \
+ .gpio_irq_init = meson_a1_gpio_irq_init, \
+ .gpio_irq_sel_pin = meson_a1_gpio_irq_sel_pin, \
+ .gpio_irq_sel_type = meson_s4_gpio_irq_sel_type,\
+ }, \
+ .support_edge_both = true, \
+ .edge_both_offset = 0, \
+ .edge_single_offset = 12, \
+ .pol_low_offset = 0, \
+ .pin_sel_mask = 0xff, \
+ .nr_channels = 12, \
+
static const struct meson_gpio_irq_params meson8_params = {
INIT_MESON8_COMMON_DATA(134)
};
@@ -125,6 +144,10 @@ static const struct meson_gpio_irq_params a1_params = {
INIT_MESON_A1_COMMON_DATA(62)
};

+static const struct meson_gpio_irq_params s4_params = {
+ INIT_MESON_S4_COMMON_DATA(82)
+};
+
static const struct of_device_id meson_irq_gpio_matches[] = {
{ .compatible = "amlogic,meson8-gpio-intc", .data = &meson8_params },
{ .compatible = "amlogic,meson8b-gpio-intc", .data = &meson8b_params },
@@ -134,6 +157,7 @@ static const struct of_device_id meson_irq_gpio_matches[] = {
{ .compatible = "amlogic,meson-g12a-gpio-intc", .data = &axg_params },
{ .compatible = "amlogic,meson-sm1-gpio-intc", .data = &sm1_params },
{ .compatible = "amlogic,meson-a1-gpio-intc", .data = &a1_params },
+ { .compatible = "amlogic,meson-s4-gpio-intc", .data = &s4_params },
{ }
};

@@ -200,6 +224,46 @@ static void meson_a1_gpio_irq_init(struct meson_gpio_irq_controller *ctl)
meson_gpio_irq_update_bits(ctl, REG_EDGE_POL, BIT(31), BIT(31));
}

+/*
+ * gpio irq relative registers for s4
+ * -PADCTRL_GPIO_IRQ_CTRL0
+ * bit[31]: enable/disable all the irq lines
+ * bit[12-23]: single edge trigger
+ * bit[0-11]: polarity trigger
+ *
+ * -PADCTRL_GPIO_IRQ_CTRL[X]
+ * bit[0-16]: 7 bits to choose gpio source for irq line 2*[X] - 2
+ * bit[16-22]:7 bits to choose gpio source for irq line 2*[X] - 1
+ * where X = 1-6
+ *
+ * -PADCTRL_GPIO_IRQ_CTRL[7]
+ * bit[0-11]: both edge trigger
+ */
+static void
+meson_s4_gpio_irq_sel_type(struct meson_gpio_irq_controller *ctl,
+ unsigned int idx, unsigned int type)
+{
+ unsigned int val = 0;
+
+ meson_gpio_irq_update_bits(ctl, REG_EDGE_POL_S4, BIT(idx), 0);
+
+ if (type == IRQ_TYPE_EDGE_BOTH) {
+ val |= BIT(ctl->params->edge_both_offset + idx);
+ meson_gpio_irq_update_bits(ctl, REG_EDGE_POL_S4,
+ BIT(ctl->params->edge_both_offset + idx), val);
+ return;
+ }
+
+ if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_EDGE_FALLING))
+ val |= BIT(ctl->params->pol_low_offset + idx);
+
+ if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
+ val |= BIT(ctl->params->edge_single_offset + idx);
+
+ meson_gpio_irq_update_bits(ctl, REG_EDGE_POL,
+ BIT(idx) | BIT(12 + idx), val);
+};
+
static int
meson_gpio_irq_request_channel(struct meson_gpio_irq_controller *ctl,
unsigned long hwirq,
--
2.34.1
\
 
 \ /
  Last update: 2022-01-19 08:09    [W:0.074 / U:0.224 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site