lkml.org 
[lkml]   [2022]   [Jan]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/4] irqchip/meson-gpio: support more than 8 channels gpio irq line
Date
Current meson gpio irqchip driver only support 8 channels for gpio irq
line, later chips may have more then 8 channels, so need to modify code
to support more.

Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
---
drivers/irqchip/irq-meson-gpio.c | 33 +++++++++++++++++++++++---------
1 file changed, 24 insertions(+), 9 deletions(-)

diff --git a/drivers/irqchip/irq-meson-gpio.c b/drivers/irqchip/irq-meson-gpio.c
index d90ff0b92480..eefe15e1b3a6 100644
--- a/drivers/irqchip/irq-meson-gpio.c
+++ b/drivers/irqchip/irq-meson-gpio.c
@@ -16,7 +16,6 @@
#include <linux/of.h>
#include <linux/of_address.h>

-#define NUM_CHANNEL 8
#define MAX_INPUT_MUX 256

#define REG_EDGE_POL 0x00
@@ -60,6 +59,7 @@ struct irq_ctl_ops {

struct meson_gpio_irq_params {
unsigned int nr_hwirq;
+ unsigned int nr_channels;
bool support_edge_both;
unsigned int edge_both_offset;
unsigned int edge_single_offset;
@@ -81,6 +81,7 @@ struct meson_gpio_irq_params {
.edge_single_offset = 0, \
.pol_low_offset = 16, \
.pin_sel_mask = 0xff, \
+ .nr_channels = 8, \

#define INIT_MESON_A1_COMMON_DATA(irqs) \
INIT_MESON_COMMON(irqs, meson_a1_gpio_irq_init, \
@@ -90,6 +91,7 @@ struct meson_gpio_irq_params {
.edge_single_offset = 8, \
.pol_low_offset = 0, \
.pin_sel_mask = 0x7f, \
+ .nr_channels = 8, \

static const struct meson_gpio_irq_params meson8_params = {
INIT_MESON8_COMMON_DATA(134)
@@ -136,8 +138,8 @@ static const struct of_device_id meson_irq_gpio_matches[] = {
struct meson_gpio_irq_controller {
const struct meson_gpio_irq_params *params;
void __iomem *base;
- u32 channel_irqs[NUM_CHANNEL];
- DECLARE_BITMAP(channel_map, NUM_CHANNEL);
+ u32 *channel_irqs;
+ unsigned long *channel_map;
spinlock_t lock;
};

@@ -207,8 +209,8 @@ meson_gpio_irq_request_channel(struct meson_gpio_irq_controller *ctl,
spin_lock_irqsave(&ctl->lock, flags);

/* Find a free channel */
- idx = find_first_zero_bit(ctl->channel_map, NUM_CHANNEL);
- if (idx >= NUM_CHANNEL) {
+ idx = find_first_zero_bit(ctl->channel_map, ctl->params->nr_channels);
+ if (idx >= ctl->params->nr_channels) {
spin_unlock_irqrestore(&ctl->lock, flags);
pr_err("No channel available\n");
return -ENOSPC;
@@ -447,13 +449,26 @@ static int meson_gpio_irq_parse_dt(struct device_node *node, struct meson_gpio_i

ctl->params = match->data;

+ ctl->channel_irqs = kcalloc(ctl->params->nr_channels, sizeof(*ctl->channel_irqs),
+ GFP_KERNEL);
+ if (!ctl->channel_irqs)
+ return -ENOMEM;
+
+ ctl->channel_map = bitmap_zalloc(ctl->params->nr_channels, GFP_KERNEL);
+ if (!ctl->channel_map) {
+ kfree(ctl->channel_irqs);
+ return -ENOMEM;
+ }
+
ret = of_property_read_variable_u32_array(node,
"amlogic,channel-interrupts",
ctl->channel_irqs,
- NUM_CHANNEL,
- NUM_CHANNEL);
+ ctl->params->nr_channels,
+ ctl->params->nr_channels);
if (ret < 0) {
- pr_err("can't get %d channel interrupts\n", NUM_CHANNEL);
+ pr_err("can't get %d channel interrupts\n", ctl->params->nr_channels);
+ kfree(ctl->channel_map);
+ kfree(ctl->channel_irqs);
return ret;
}

@@ -507,7 +522,7 @@ static int meson_gpio_irq_of_init(struct device_node *node, struct device_node *
}

pr_info("%d to %d gpio interrupt mux initialized\n",
- ctl->params->nr_hwirq, NUM_CHANNEL);
+ ctl->params->nr_hwirq, ctl->params->nr_channels);

return 0;

--
2.34.1
\
 
 \ /
  Last update: 2022-01-19 08:09    [W:0.092 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site