Messages in this thread | | | Date | Tue, 18 Jan 2022 09:34:22 +0100 | From | Sascha Hauer <> | Subject | Re: [RFC PATCH v3 0/4] Fix and improve gpmi nand on mx28 |
| |
On Mon, Jan 17, 2022 at 05:17:51PM +0100, Dario Binacchi wrote: > Starting from [1], the series fixes the timings setting of the gpmi > controller for the mx28 architecture, also adding support for fast > edo mode timings. The whole series has been heavily tested with the > mtd kernel test modules, and with repeated write cycles on nand. > > [1] https://lore.kernel.org/r/20210702065350.209646-5-ebiggers@kernel.org > > Changes in v3: > - Remove the "mtd: rawnand: gpmi: use a table to get EDO mode setup" patch. > - Simplify the validation logic (suggested by Sascha Hauer <sha@pengutronix.de>).
Thanks Dario. I gave it a test on a custom i.MX28 board and it works as expected.
For the series:
Tested-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha
-- Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
| |