lkml.org 
[lkml]   [2022]   [Jan]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: Re: [PATCH v1 1/3] dts64: rk3568: drop pclk_xpcs from gmac0
On Mon, Jan 17, 2022 at 6:59 AM Frank Wunderlich
<frank-w@public-files.de> wrote:
>
> Hi
>
> > Gesendet: Montag, 17. Januar 2022 um 11:47 Uhr
> > Von: "Johan Jonker" <jbx6244@gmail.com>
> > Hi Frank,
> >
> > Despite that the DT is hosted in the kernel tree
> > DT and mainline kernel driver support are 2 separate things.
> > PCLK_XPCS might be in use elsewhere.
> >
> > Given the link below pclk_xpcs is only needed for rk3568.
> > Maybe gmac1 should have a PCLK_XPCS too, because one can select between
> > them.
> >
> > ethernet: stmicro: stmmac: Add SGMII/QSGMII support for RK3568
> > https://github.com/rockchip-linux/kernel/commit/1fc7cbfe9e227c700c692f1de3137914b3ea6ca6
> >
> > The original dtsi did have PCLK_XPCS in both nodes.
> > https://github.com/rockchip-linux/kernel/blob/develop-4.19/arch/arm64/boot/dts/rockchip/rk3568.dtsi#L2121
> > https://github.com/rockchip-linux/kernel/blob/develop-4.19/arch/arm64/boot/dts/rockchip/rk3568.dtsi#L1492
> >
> > Maybe fix the document or leave it as it is for now as long the driver
> > isn't updated and someone has tested it.
> > That's up to the DT maintainer.
> >
> > Johan
>
> as far as i understand, the PCLK_XPCS is part of the naneng combphy, which is not yet available in mainline.
> Naneng driver needs some changes and imho this should be part of it (including change documentation). That also makes it clear why this clock is added.
> But leaving an unused property with sideeffects is imho no good choice.
>
> So this was the easiest way to fix the dtbs_check. Else i got no usable result for it. Maybe adding it to Documentation is also easy, but have not yet looked into it as it currently unused from my POV.
>
> But i leave it as decision for Maintainer to drop this patch as it is not needed for my Board DTS.

As both the current submission of the combophy driver and the gmac
driver do not support xpcs, I elected to remove the clock vice adding
documentation for something which is not currently supported.
This is especially true as it only leaked through for the gmac0 port,
the gmac1 port is modeled to the current support level.

Once xpcs support is introduced, the clock can be added to the
documentation and both controllers as part of the same patch series.

Do you concur, Heiko?

>
> > ===
> >
> > XPCS is also part of PD_PIPE.
> > See Rockchip RK3568 TRM Part1 V1.0-20210111.pdf page 475.
> > Please advise if the power-domain@RK3568_PD_PIPE does need a PCLK_XPCS
> > fix or is PCLK_PIPE enough in combination with a PHY driver?
> >
> > PD_PIPE:
> >
> > BIU_PIPE
> > USB3OTG
> > PCIE20
> > PCIE30
> > SATA
> > XPCS
> >
> >
> > power-domain@RK3568_PD_PIPE {
> > reg = <RK3568_PD_PIPE>;
> > clocks = <&cru PCLK_PIPE>;
> > pm_qos = <&qos_pcie2x1>,
> > <&qos_pcie3x1>,
> > <&qos_pcie3x2>,
> > <&qos_sata0>,
> > <&qos_sata1>,
> > <&qos_sata2>,
> > <&qos_usb3_0>,
> > <&qos_usb3_1>;
> > #power-domain-cells = <0>;
> > };
>
> PD_PIPE is imho also part of Naneng. But more for usage as USB3/SATA/... phy. This is not part of Mainline too.
>
> But thanks for pointing.
>
> regards Frank

\
 
 \ /
  Last update: 2022-01-17 19:27    [W:0.073 / U:0.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site