lkml.org 
[lkml]   [2022]   [Jan]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 3/3] arm64: dts: meson: remove Broadcom WiFi/BT nodes from Khadas VIM1
From
Date
Hi,

On 13/01/2022 05:17, Christian Hewitt wrote:
> The Broadcom WiFi/BT SDIO nodes are now inherited from the P212 common dtsi
> so we can remove them from the VIM1 board dts.
>
> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
> ---
> .../amlogic/meson-gxl-s905x-khadas-vim.dts | 19 -------------------
> 1 file changed, 19 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
> index 6ab1cc125b96..108232a5aa2e 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
> @@ -217,25 +217,6 @@
> pinctrl-0 = <&pwm_e_pins>, <&pwm_f_clk_pins>;
> };
>
> -&sd_emmc_a {
> - max-frequency = <100000000>;

The SDIO freq is marked as 50000000 in the p212 DTSI and was explicitly changes
by Jerome in adc52bf7ef16 ("arm64: dts: meson: fix mmc v2 chips max frequencies")

The change is ok if you change the p212 DTSI to 100000000 aswell.

> -
> - brcmf: wifi@1 {
> - reg = <1>;
> - compatible = "brcm,bcm4329-fmac";
> - };
> -};
> -
> -&uart_A {
> - bluetooth {
> - compatible = "brcm,bcm43438-bt";
> - shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
> - max-speed = <2000000>;
> - clocks = <&wifi32k>;
> - clock-names = "lpo";
> - };
> -};
> -
> /* This is brought out on the Linux_RX (18) and Linux_TX (19) pins: */
> &uart_AO {
> status = "okay";
>

With the change in p212 dtsi:

Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>

Thanks,
Neil

\
 
 \ /
  Last update: 2022-01-17 15:31    [W:0.074 / U:0.688 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site