lkml.org 
[lkml]   [2022]   [Jan]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: dw_hdmi is showing wrong colour after commit 7cd70656d1285b79("drm/bridge: display-connector: implement bus fmts callbacks")
From
Date
On 17/01/2022 13:13, Biju Das wrote:
> Hi Neil,
>> Subject: Re: dw_hdmi is showing wrong colour after commit
>> 7cd70656d1285b79("drm/bridge: display-connector: implement bus fmts
>> callbacks")
>>
>> Hi again,
>>
>> On 14/01/2022 15:40, Neil Armstrong wrote:
>>> Hi,
>>>
>>> On 14/01/2022 15:23, Biju Das wrote:
>>>>
>>>>
>>>>> -----Original Message-----
>>>>> From: Neil Armstrong <narmstrong@baylibre.com>
>>>>> Sent: 14 January 2022 13:56
>>>>> To: Biju Das <biju.das.jz@bp.renesas.com>; Fabio Estevam
>>>>> <festevam@gmail.com>
>>>>> Cc: daniel@ffwll.ch; Laurent.pinchart@ideasonboard.com;
>>>>> robert.foss@linaro.org; jonas@kwiboo.se; jernej.skrabec@gmail.com;
>>>>> martin.blumenstingl@googlemail.com;
>>>>> linux-amlogic@lists.infradead.org;
>>>>> linux-arm-kernel@lists.infradead.org;
>>>>> dri-devel@lists.freedesktop.org; linux-kernel@vger.kernel.org;
>>>>> linux-renesas-soc@vger.kernel.org
>>>>> Subject: Re: dw_hdmi is showing wrong colour after commit
>>>>> 7cd70656d1285b79("drm/bridge: display-connector: implement bus fmts
>>>>> callbacks")
>>>>>
>>>>> Hi,
>>>>>
>>>>> On 14/01/2022 12:08, Biju Das wrote:
>>>>>> Hi Neil,
>>>>>>
>>>>>>> Subject: Re: dw_hdmi is showing wrong colour after commit
>>>>>>> 7cd70656d1285b79("drm/bridge: display-connector: implement bus
>>>>>>> fmts
>>>>>>> callbacks")
>>>>>>>
>>>>>>> On 14/01/2022 09:29, Biju Das wrote:
>>>>>>>> Hi Neil,
>>>>>>>>
>>>>>>>> + renesas-soc
>>>>>>>>
>>>>>>>>> Subject: Re: dw_hdmi is showing wrong colour after commit
>>>>>>>>> 7cd70656d1285b79("drm/bridge: display-connector: implement bus
>>>>>>>>> fmts
>>>>>>>>> callbacks")
>>>>>>>>>
>>>>>>>>> Hi,
>>>>>>>>>
>>>>>>>>> On 13/01/2022 21:01, Fabio Estevam wrote:
>>>>>>>>>> Hi Biju,
>>>>>>>>>>
>>>>>>>>>> On Thu, Jan 13, 2022 at 2:45 PM Biju Das
>>>>>>>>>> <biju.das.jz@bp.renesas.com>
>>>>>>>>> wrote:
>>>>>>>>>>>
>>>>>>>>>>> Hi All,
>>>>>>>>>>>
>>>>>>>>>>> RZ/G2{H, M, N} SoC has dw_hdmi IP and it was working
>>>>>>>>>>> ok(colour) till the commit
>>>>>>>>>>> 7cd70656d1285b79("drm/bridge: display-connector: implement bus
>>>>>>>>>>> fmts
>>>>>>>>> callbacks").
>>>>>>>>>>>
>>>>>>>>>>> After this patch, the screen becomes greenish(may be it is
>>>>>>>>>>> setting it
>>>>>>>>> into YUV format??).
>>>>>>>>>>>
>>>>>>>>>>> By checking the code, previously it used to call get_input_fmt
>>>>>>>>>>> callback
>>>>>>>>> and set colour as RGB24.
>>>>>>>>>>>
>>>>>>>>>>> After this commit, it calls get_output_fmt_callbck and returns
>>>>>>>>>>> 3 outputformats(YUV16, YUV24 and RGB24) And get_input_fmt
>>>>>>>>>>> callback, I see
>>>>>>>>> the outputformat as YUV16 instead of RGB24.
>>>>>>>>>>>
>>>>>>>>>>> Not sure, I am the only one seeing this issue with dw_HDMI
>> driver.
>>>>>>>>>
>>>>>>>>> This patch was introduced to maintain the bridge color format
>>>>>>>>> negotiation after using DRM_BRIDGE_ATTACH_NO_CONNECTOR, but it
>>>>>>>>> seems it behaves incorrectly if the first bridge doesn't
>>>>>>>>> implement the negotiation callbacks.
>>>>>>>>>
>>>>>>>>> Let me check the code to see how to fix that.
>>>>>>>>
>>>>>>>> Thanks for the information, I am happy to test the patch/fix.
>>>>>>>>
>>>>>>>> Cheers,
>>>>>>>> Biju
>>>>>>>>
>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> I have tested linux-next 20220112 on a imx6q-sabresd board,
>>>>>>>>>> which
>>>>>>> shows:
>>>>>>>>>>
>>>>>>>>>> dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.30a with
>>>>>>>>>> HDCP (DWC HDMI 3D TX PHY)
>>>>>>>>>>
>>>>>>>>>> The colors are shown correctly here.
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>> The imx doesn't use DRM_BRIDGE_ATTACH_NO_CONNECTOR so the
>>>>>>>>> negotiation fails and use the RGB fallback input & output format.
>>>>>>>>>
>>>>>>>>> Anyway thanks for testing
>>>>>>>>>
>>>>>>>>> Neil
>>>>>>>
>>>>>>> Can you test :
>>>>>>>
>>>>>>> ==><===============================
>>>>>>> diff --git a/drivers/gpu/drm/drm_bridge.c
>>>>>>> b/drivers/gpu/drm/drm_bridge.c index c96847fc0ebc..7019acd37716
>>>>>>> 100644
>>>>>>> --- a/drivers/gpu/drm/drm_bridge.c
>>>>>>> +++ b/drivers/gpu/drm/drm_bridge.c
>>>>>>> @@ -955,7 +955,14 @@
>>>>>>> drm_atomic_bridge_chain_select_bus_fmts(struct
>>>>>>> drm_bridge *bridge,
>>>>>>> last_bridge_state =
>>>>>>> drm_atomic_get_new_bridge_state(crtc_state-
>>>>>>>> state,
>>>>>>>
>>>>>>> last_bridge);
>>>>>>>
>>>>>>> - if (last_bridge->funcs->atomic_get_output_bus_fmts) {
>>>>>>> + /*
>>>>>>> + * Only negociate with real values if both end of the
>>>>>>> + bridge
>>>>> chain
>>>>>>> + * support negociation callbacks, otherwise you can end in
>>>>>>> + a
>>>>>>> situation
>>>>>>> + * where the selected output format doesn't match with the
>>>>>>> + first
>>>>>>> bridge
>>>>>>> + * output format.
>>>>>>> + */
>>>>>>> + if (bridge->funcs->atomic_get_input_bus_fmts &&
>>>>>>> + last_bridge->funcs->atomic_get_output_bus_fmts) {
>>>>>>> const struct drm_bridge_funcs *funcs =
>>>>>>> last_bridge->funcs;
>>>>>>>
>>>>>>> /*
>>>>>>> @@ -980,7 +987,12 @@
>>>>>>> drm_atomic_bridge_chain_select_bus_fmts(struct
>>>>>>> drm_bridge *bridge,
>>>>>>> if (!out_bus_fmts)
>>>>>>> return -ENOMEM;
>>>>>>>
>>>>>>> - if (conn->display_info.num_bus_formats &&
>>>>>>> + /*
>>>>>>> + * If first bridge doesn't support negociation,
>>>>>>> + use
>>>>>>> MEDIA_BUS_FMT_FIXED
>>>>>>> + * as a safe value for the whole bridge chain
>>>>>>> + */
>>>>>>> + if (bridge->funcs->atomic_get_input_bus_fmts &&
>>>>>>> + conn->display_info.num_bus_formats &&
>>>>>>> conn->display_info.bus_formats)
>>>>>>> out_bus_fmts[0] = conn-
>>>>>>>> display_info.bus_formats[0];
>>>>>>> else
>>>>>>> ==><===============================
>>>>>>>
>>>>>>> This should exclude your situation where the first bridge doesn't
>>>>>>> support negociation.
>>>>>>
>>>>>> I have tested this fix with Linux next-20220114. Still I see colour
>>>>> issue.
>>>>>>
>>>>>> It is still negotiating and it is calling get_output_fmt_callbck
>>>>>>
>>>>>> [ 3.460155] ########dw_hdmi_bridge_atomic_get_output_bus_fmts
>>>>> MEDIA_BUS_FMT_UYVY8_1X16=0#########
>>>>>> [ 3.460180] ########dw_hdmi_bridge_atomic_get_output_bus_fmts
>>>>> MEDIA_BUS_FMT_YUV8_1X24=1#########
>>>>>> [ 3.460202] ########dw_hdmi_bridge_atomic_get_output_bus_fmts
>>>>> MEDIA_BUS_FMT_RGB888_1X24=2#########
>>>>>>
>>>>>> And In get_input_fmt callback, I See the outputformat as YUV16
>>>>>> instead
>>>>> of RGB24.
>>>>>>
>>>>>> [ 3.460319] ########dw_hdmi_bridge_atomic_get_input_bus_fmts
>>>>> MEDIA_BUS_FMT_UYVY8_1X16#########
>>>>>> [ 3.473644] ########hdmi_video_sample
>>>>> MEDIA_BUS_FMT_UYVY8_1X16#########
>>>>>
>>>>> OK, looking at rcar-du, the dw-hdmi bridge is directly connected to
>>>>> the encoder.
>>>>
>>>> Yep.
>>>>
>>>>>
>>>>> Let me figure that out, no sure I can find a clean solution except
>>>>> putting back RGB24 before YUV.
>>>>>
>>>>> Anyway please test that:
>>>>
>>>> It works now after reordering.
>>>>
>>>> [ 3.493302] ########dw_hdmi_bridge_atomic_get_output_bus_fmts
>> MEDIA_BUS_FMT_RGB888_1X24=0#########
>>>> [ 3.493326] ########dw_hdmi_bridge_atomic_get_output_bus_fmts
>> MEDIA_BUS_FMT_YUV8_1X24=1#########
>>>> [ 3.493348] ########dw_hdmi_bridge_atomic_get_output_bus_fmts
>> MEDIA_BUS_FMT_UYVY8_1X16=2#########
>>>>
>>>> [ 3.493463] ########dw_hdmi_bridge_atomic_get_input_bus_fmts
>> MEDIA_BUS_FMT_RGB888_1X24#########
>>>> [ 3.506797] ########hdmi_video_sample
>> MEDIA_BUS_FMT_RGB888_1X24#########
>>>>
>>>> Is it acceptable solution to the users of dw_hdmi driver? May be it is
>> worth to post a patch.
>>>> at least it is fixing the colour issue??
>>>
>>> Yes, it gets back to default behavior before negociation, nevertheless
>>> we need to think how to handle your use-case correctly at some point.
>>>
>>> I'll post this as a patch ASAP so it gets applied before landing in
>> linus master.
>>>
>>> Neil
>>>
>>>>
>>>> Regards,
>>>> Biju
>>>>
>>>>>
>> [...]
>>
>> I'm not happy with this version since it's merely a hack which makes it
>> work.
>>
>> Can you test the following change instead, it's correctly handles your
>> situation in a generic manner.
>>
>> ========================><=============================
>> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
>> b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
>> index 54d8fdad395f..9f2e1cac0ae2 100644
>> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
>> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
>> @@ -2551,8 +2551,9 @@ static u32
>> *dw_hdmi_bridge_atomic_get_output_bus_fmts(struct drm_bridge *bridge,
>> if (!output_fmts)
>> return NULL;
>>
>> - /* If dw-hdmi is the only bridge, avoid negociating with ourselves
>> */
>> - if (list_is_singular(&bridge->encoder->bridge_chain)) {
>> + /* If dw-hdmi is the first or only bridge, avoid negociating with
>> ourselves */
>> + if (list_is_singular(&bridge->encoder->bridge_chain) ||
>> + list_is_first(&bridge->chain_node,
>> + &bridge->encoder->bridge_chain)) {
>> *num_output_fmts = 1;
>> output_fmts[0] = MEDIA_BUS_FMT_FIXED;
>>
>> @@ -2673,6 +2674,10 @@ static u32
>> *dw_hdmi_bridge_atomic_get_input_bus_fmts(struct drm_bridge *bridge,
>> if (!input_fmts)
>> return NULL;
>>
>> + /* If dw-hdmi is the first bridge fall-back to safe output format
>> */
>> + if (list_is_first(&bridge->chain_node, &bridge->encoder-
>>> bridge_chain))
>> + output_fmt = MEDIA_BUS_FMT_FIXED;
>> +
>> switch (output_fmt) {
>> /* If MEDIA_BUS_FMT_FIXED is tested, return default bus format */
>> case MEDIA_BUS_FMT_FIXED:
>> ========================><=============================
>
> This patch alone fixes the issue. I have tested with Linux-next.
> Do we need below code, as it is already taken care in output_bus_fmt callback.

You're right in your case the first part is enough.

>
>> + if (list_is_first(&bridge->chain_node, &bridge->encoder-
>>> bridge_chain))
>> + output_fmt = MEDIA_BUS_FMT_FIXED;
>
> Cheers,
> Biju
>

Thanks for testing,
Neil

\
 
 \ /
  Last update: 2022-01-17 14:53    [W:1.415 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site