lkml.org 
[lkml]   [2022]   [Jan]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v3 0/2] leds: add ktd20xx LED driver support
Date
Introducing the KTD2061/58/59/60 RGB LED drivers. The difference in
these are the address numbers on the I2C bus that the device listens to.

Due to the hardware limitation, we can only set 7 colors and the color
black (LED off) for each LED independently and not the full RGB range.

v1: Initial send
v2: Remove variant 1 from source
v3: Changes requested by Andy Shevchenko added. Thanks for reviewing
- Removing OF dependency
- Add missing includes
- Use device_property_read_u32() instead of fwnode_property_read_u32()
- Use one liner function pattern <test> ? <value-true> : <value-false>
- Remove switch case call for intensity color selection use BIT()
instead
- Remove not needed fwnode_handle_put() in ktd200xx_probe_dt() function
- Use dev_get_drvdata() instead of i2c_get_clientdata() function call
- Use sysfs_emit() function call
- Use kstrtobool() function call
- Remove not needed comma after last array element
- Use dev_err_probe() instead of dev_error() in driver probe function
- Do not use dev_group registration function set .dev_groups directly
into ktd20xx_driver struct.

Florian Eckert (2):
leds: ktd20xx: Extension of the KTD20xx family of LED drivers from
Kinetic
dt: bindings: KTD20xx: Introduce the ktd20xx family of RGB drivers

.../bindings/leds/leds-ktd20xx.yaml | 130 ++++
MAINTAINERS | 7 +
drivers/leds/Kconfig | 12 +
drivers/leds/Makefile | 1 +
drivers/leds/leds-ktd20xx.c | 580 ++++++++++++++++++
5 files changed, 730 insertions(+)
create mode 100644 Documentation/devicetree/bindings/leds/leds-ktd20xx.yaml
create mode 100644 drivers/leds/leds-ktd20xx.c

--
2.20.1

\
 
 \ /
  Last update: 2022-01-17 13:48    [W:3.231 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site