lkml.org 
[lkml]   [2022]   [Jan]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[irqchip: irq/irqchip-fixes] irqchip/realtek-rtl: Fix off-by-one in routing
The following commit has been merged into the irq/irqchip-fixes branch of irqchip:

Commit-ID: 91351b5dd0fd494eb2d85e1bb6aca77b067447e0
Gitweb: https://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms/91351b5dd0fd494eb2d85e1bb6aca77b067447e0
Author: Sander Vanheule <sander@svanheule.net>
AuthorDate: Sun, 09 Jan 2022 15:54:33 +01:00
Committer: Marc Zyngier <maz@kernel.org>
CommitterDate: Mon, 17 Jan 2022 12:14:04

irqchip/realtek-rtl: Fix off-by-one in routing

There is an offset between routing values (1..6) and the connected MIPS
CPU interrupts (2..7), but no distinction was made between these two
values.

This issue was previously hidden during testing, because an interrupt
mapping was used where for each required interrupt another (unused)
routing was configured, with an offset of +1.

Offset the CPU IRQ numbers by -1 to retrieve the correct routing value.

Fixes: 9f3a0f34b84a ("irqchip: Add support for Realtek RTL838x/RTL839x interrupt controller")
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/177b920aa8d8610615692d0e657e509f363c85ca.1641739718.git.sander@svanheule.net
---
drivers/irqchip/irq-realtek-rtl.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/irqchip/irq-realtek-rtl.c b/drivers/irqchip/irq-realtek-rtl.c
index d6788dd..568614e 100644
--- a/drivers/irqchip/irq-realtek-rtl.c
+++ b/drivers/irqchip/irq-realtek-rtl.c
@@ -95,7 +95,8 @@ out:
* SoC interrupts are cascaded to MIPS CPU interrupts according to the
* interrupt-map in the device tree. Each SoC interrupt gets 4 bits for
* the CPU interrupt in an Interrupt Routing Register. Max 32 SoC interrupts
- * thus go into 4 IRRs.
+ * thus go into 4 IRRs. A routing value of '0' means the interrupt is left
+ * disconnected. Routing values {1..15} connect to output lines {0..14}.
*/
static int __init map_interrupts(struct device_node *node, struct irq_domain *domain)
{
@@ -134,7 +135,7 @@ static int __init map_interrupts(struct device_node *node, struct irq_domain *do
of_node_put(cpu_ictl);

cpu_int = be32_to_cpup(imap + 2);
- if (cpu_int > 7)
+ if (cpu_int > 7 || cpu_int < 2)
return -EINVAL;

if (!(mips_irqs_set & BIT(cpu_int))) {
@@ -143,7 +144,8 @@ static int __init map_interrupts(struct device_node *node, struct irq_domain *do
mips_irqs_set |= BIT(cpu_int);
}

- regs[(soc_int * 4) / 32] |= cpu_int << (soc_int * 4) % 32;
+ /* Use routing values (1..6) for CPU interrupts (2..7) */
+ regs[(soc_int * 4) / 32] |= (cpu_int - 1) << (soc_int * 4) % 32;
imap += 3;
}

\
 
 \ /
  Last update: 2022-01-17 13:28    [W:0.022 / U:3.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site