lkml.org 
[lkml]   [2022]   [Jan]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4] xhci: re-initialize the HC during resume if HCE was set
From
Date
On 17.1.2022 7.39, Puma Hsu wrote:
> When HCE(Host Controller Error) is set, it means an internal
> error condition has been detected. Software needs to re-initialize
> the HC, so add this check in xhci resume.
>
> Cc: stable@vger.kernel.org
> Signed-off-by: Puma Hsu <pumahsu@google.com>
> ---
> v2: Follow Sergey Shtylyov <s.shtylyov@omp.ru>'s comment.
> v3: Add stable@vger.kernel.org for stable release.
> v4: Refine the commit message.
>
> drivers/usb/host/xhci.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
> index dc357cabb265..ab440ce8420f 100644
> --- a/drivers/usb/host/xhci.c
> +++ b/drivers/usb/host/xhci.c
> @@ -1146,8 +1146,8 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
> temp = readl(&xhci->op_regs->status);
> }
>
> - /* If restore operation fails, re-initialize the HC during resume */
> - if ((temp & STS_SRE) || hibernated) {
> + /* If restore operation fails or HC error is detected, re-initialize the HC during resume */
> + if ((temp & (STS_SRE | STS_HCE)) || hibernated) {

Add a debug message in case we reset due to HCE

-Mathias

\
 
 \ /
  Last update: 2022-01-17 13:24    [W:0.034 / U:0.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site