lkml.org 
[lkml]   [2022]   [Jan]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 0/2] Clock based PWM output driver
Hello Nikita,

On Mon, Dec 13, 2021 at 08:03:33PM +0500, Nikita Travkin wrote:
> This series introduces an "adapter" driver that allows PWM consumers
> to control clock outputs with duty-cycle control.
>
> Some platforms (e.g. some Qualcomm chipsets) have "General Purpose"
> clocks that can be muxed to GPIO outputs and used as PWM outputs.
> Those outputs may be connected to various peripherals such as
> leds in display backlight or haptic feedback motor driver.
>
> To avoid re-implementing every single PWM consumer driver with clk
> support (like in [1]) and don't put the burden of providing the PWM
> sources on the clock drivers (as was proposed in [2]), clk based
> pwm controller driver is introduced.
>
> There is an existing driver that provides the opposite function
> in drivers/clk/clk-pwm.c with a compatible "pwm-clock" so the new
> driver uses the opposite naming scheme: drivers/pwm/pwm-clk.c
> and compatible "clk-pwm".

You got some feedback on your patches and didn't respond to it. Are you
interested to improve your patch set? If yes, I'm willing to review more
deeply. If not, I'm not.

Best regards
Uwe

--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | https://www.pengutronix.de/ |
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2022-01-17 13:11    [W:1.375 / U:0.324 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site