lkml.org 
[lkml]   [2022]   [Jan]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRe: [PATCH v2] pinctrl: at91-pio4: Use platform_get_irq() to get the interrupt
Date
On 1/4/22 4:09 PM, Lad Prabhakar wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>
> platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
> allocation of IRQ resources in DT core code, this causes an issue
> when using hierarchical interrupt domains using "interrupts" property
> in the node as this bypasses the hierarchical setup and messes up the
> irq chaining.
>
> In preparation for removal of static setup of IRQ resource from DT core
> code use platform_get_irq().
>
> While at it, replace the dev_err() with dev_dbg() as platform_get_irq()
> prints an error message upon error.
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Tested-by: Tudor Ambarus <tudor.ambarus@microchip.com>

thanks,
ta
> ---
> v1->v2
> * Switched using platform_get_irq()
> * Replaced dev_err() with dev_dbg()
>
> v1: https://lore.kernel.org/lkml/20211224145748.18754-3-prabhakar.mahadev-lad.rj@bp.renesas.com/
> ---
> drivers/pinctrl/pinctrl-at91-pio4.c | 16 +++++++---------
> 1 file changed, 7 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/pinctrl/pinctrl-at91-pio4.c b/drivers/pinctrl/pinctrl-at91-pio4.c
> index fafd1f55cba7..517f2a6330ad 100644
> --- a/drivers/pinctrl/pinctrl-at91-pio4.c
> +++ b/drivers/pinctrl/pinctrl-at91-pio4.c
> @@ -1045,7 +1045,6 @@ static int atmel_pinctrl_probe(struct platform_device *pdev)
> const char **group_names;
> const struct of_device_id *match;
> int i, ret;
> - struct resource *res;
> struct atmel_pioctrl *atmel_pioctrl;
> const struct atmel_pioctrl_data *atmel_pioctrl_data;
>
> @@ -1164,16 +1163,15 @@ static int atmel_pinctrl_probe(struct platform_device *pdev)
>
> /* There is one controller but each bank has its own irq line. */
> for (i = 0; i < atmel_pioctrl->nbanks; i++) {
> - res = platform_get_resource(pdev, IORESOURCE_IRQ, i);
> - if (!res) {
> - dev_err(dev, "missing irq resource for group %c\n",
> + ret = platform_get_irq(pdev, i);
> + if (ret < 0) {
> + dev_dbg(dev, "missing irq resource for group %c\n",
> 'A' + i);
> - return -EINVAL;
> + return ret;
> }
> - atmel_pioctrl->irqs[i] = res->start;
> - irq_set_chained_handler_and_data(res->start,
> - atmel_gpio_irq_handler, atmel_pioctrl);
> - dev_dbg(dev, "bank %i: irq=%pr\n", i, res);
> + atmel_pioctrl->irqs[i] = ret;
> + irq_set_chained_handler_and_data(ret, atmel_gpio_irq_handler, atmel_pioctrl);
> + dev_dbg(dev, "bank %i: irq=%d\n", i, ret);
> }
>
> atmel_pioctrl->irq_domain = irq_domain_add_linear(dev->of_node,
> --
> 2.17.1
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>

\
 
 \ /
  Last update: 2022-01-17 09:01    [W:0.054 / U:0.488 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site