| From | Sasha Levin <> | Subject | [PATCH AUTOSEL 5.16 024/217] ath11k: enable IEEE80211_VHT_EXT_NSS_BW_CAPABLE if NSS ratio enabled | Date | Mon, 17 Jan 2022 21:16:27 -0500 |
| |
From: Wen Gong <wgong@codeaurora.org>
[ Upstream commit 78406044bdd0cc8987bc082b76867c63ab1c6af8 ]
When NSS ratio enabled reported by firmware, SUPPORTS_VHT_EXT_NSS_BW is set in ath11k, meanwhile IEEE80211_VHT_EXT_NSS_BW_CAPABLE also need to be set, otherwise it is invalid because spec in IEEE Std 802.11™‐2020 as below.
Table 9-273-Supported VHT-MCS and NSS Set subfields, it has subfield VHT Extended NSS BW Capable, its definition is: Indicates whether the STA is capable of interpreting the Extended NSS BW Support subfield of the VHT Capabilities Information field.
dmesg have a message without this patch:
ieee80211 phy0: copying sband (band 1) due to VHT EXT NSS BW flag
It means mac80211 will set IEEE80211_VHT_EXT_NSS_BW_CAPABLE if ath11k not set it in ieee80211_register_hw(). So it is better to set it in ath11k.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211013073704.15888-1-wgong@codeaurora.org Signed-off-by: Sasha Levin <sashal@kernel.org> --- drivers/net/wireless/ath/ath11k/mac.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c index 1cc55602787bb..0a196fb3df9fd 100644 --- a/drivers/net/wireless/ath/ath11k/mac.c +++ b/drivers/net/wireless/ath/ath11k/mac.c @@ -4561,6 +4561,10 @@ ath11k_create_vht_cap(struct ath11k *ar, u32 rate_cap_tx_chainmask, vht_cap.vht_supported = 1; vht_cap.cap = ar->pdev->cap.vht_cap; + if (ar->pdev->cap.nss_ratio_enabled) + vht_cap.vht_mcs.tx_highest |= + cpu_to_le16(IEEE80211_VHT_EXT_NSS_BW_CAPABLE); + ath11k_set_vht_txbf_cap(ar, &vht_cap.cap); rxmcs_map = 0; -- 2.34.1
|