lkml.org 
[lkml]   [2022]   [Jan]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH] rtc: pcf2127: use IRQ flags obtained from device tree if available
From: Hugo Villeneuve <hvilleneuve@dimonoff.com>

If the interrupt pin of the PCF2127 is routed to the input of a GPIO
expander using the pca953x driver, the later will only accept an IRQ
of type IRQ_TYPE_EDGE_FALLING or IRQ_TYPE_EDGE_RISING, and the IRQ
request will fail.

Therefore, allow the IRQ type to be passed from the device tree data
if available.

Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
---
drivers/rtc/rtc-pcf2127.c | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/rtc/rtc-pcf2127.c b/drivers/rtc/rtc-pcf2127.c
index e6d0838ccfe3..cea10fdbb010 100644
--- a/drivers/rtc/rtc-pcf2127.c
+++ b/drivers/rtc/rtc-pcf2127.c
@@ -659,9 +659,20 @@ static int pcf2127_probe(struct device *dev, struct regmap *regmap,
clear_bit(RTC_FEATURE_ALARM, pcf2127->rtc->features);

if (alarm_irq > 0) {
+ unsigned long flags;
+
+ /*
+ * If flags = 0, devm_request_threaded_irq() will use IRQ flags
+ * obtained from device tree.
+ */
+ if (dev_fwnode(dev))
+ flags = 0;
+ else
+ flags = IRQF_TRIGGER_LOW;
+
ret = devm_request_threaded_irq(dev, alarm_irq, NULL,
pcf2127_rtc_irq,
- IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+ flags | IRQF_ONESHOT,
dev_name(dev), dev);
if (ret) {
dev_err(dev, "failed to request alarm irq\n");
--
2.30.2
\
 
 \ /
  Last update: 2022-01-17 23:58    [W:0.109 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site