lkml.org 
[lkml]   [2022]   [Jan]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/2] arm64: kprobes: add support for KPROBES_ON_FTRACE
On Sun, 16 Jan 2022 17:38:26 +0800
Jianhua Liu <jianhua.ljh@gmail.com> wrote:

> On Fri, Jan 7, 2022 at 8:20 PM Masami Hiramatsu <mhiramat@kernel.org> wrote:
> >
> > On Fri, 7 Jan 2022 01:34:16 +0800
> > Jianhua Liu <jianhua.ljh@gmail.com> wrote:
> >
> > > On Fri, Dec 17, 2021 at 3:40 PM Masami Hiramatsu <mhiramat@kernel.org> wrote:
> > > >
> > > > Hi,
> > > >
> > > > On Tue, 2 Nov 2021 21:11:46 +0800
> > > > Janet Liu <jianhua.ljh@gmail.com> wrote:
> > > >
> > > > > From: Janet Liu <janet.liu@unisoc.com>
> > > > >
> > > > > This patch allow kprobes on ftrace call sites. This optimization
> > > > > avoids use of a trap with regular kprobes.
> > > > >
> > > > > This depends on HAVE_DYNAMIC_FTRACE_WITH_REGS which depends on
> > > > > "patchable-function-entry" options which is only implemented with newer
> > > > > toolchains.
> > > > >
> > > > > Signed-off-by: Janet Liu <janet.liu@unisoc.com>
> > > > > ---
> > > > > arch/arm64/Kconfig | 1 +
> > > > > arch/arm64/kernel/probes/Makefile | 1 +
> > > > > arch/arm64/kernel/probes/ftrace.c | 73 ++++++++++++++++++++++++++++++
> > > > > arch/arm64/kernel/probes/kprobes.c | 27 +++++++++++
> > > > > 4 files changed, 102 insertions(+)
> > > > > create mode 100644 arch/arm64/kernel/probes/ftrace.c
> > > > >
> > > > > diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
> > > > > index 339130712093..f59005608976 100644
> > > > > --- a/arch/arm64/Kconfig
> > > > > +++ b/arch/arm64/Kconfig
> > > > > @@ -200,6 +200,7 @@ config ARM64
> > > > > select HAVE_SYSCALL_TRACEPOINTS
> > > > > select HAVE_KPROBES
> > > > > select HAVE_OPTPROBES
> > > > > + select HAVE_KPROBES_ON_FTRACE
> > > > > select HAVE_KRETPROBES
> > > > > select HAVE_GENERIC_VDSO
> > > > > select IOMMU_DMA if IOMMU_SUPPORT
> > > > > diff --git a/arch/arm64/kernel/probes/Makefile b/arch/arm64/kernel/probes/Makefile
> > > > > index c77c92ac95fd..d9b204f4795a 100644
> > > > > --- a/arch/arm64/kernel/probes/Makefile
> > > > > +++ b/arch/arm64/kernel/probes/Makefile
> > > > > @@ -3,5 +3,6 @@ obj-$(CONFIG_KPROBES) += kprobes.o decode-insn.o \
> > > > > kprobes_trampoline.o \
> > > > > simulate-insn.o
> > > > > obj-$(CONFIG_OPTPROBES) += opt.o opt_head.o
> > > > > +obj-$(CONFIG_KPROBES_ON_FTRACE) += ftrace.o
> > > > > obj-$(CONFIG_UPROBES) += uprobes.o decode-insn.o \
> > > > > simulate-insn.o
> > > > > diff --git a/arch/arm64/kernel/probes/ftrace.c b/arch/arm64/kernel/probes/ftrace.c
> > > > > new file mode 100644
> > > > > index 000000000000..46ea92eb552f
> > > > > --- /dev/null
> > > > > +++ b/arch/arm64/kernel/probes/ftrace.c
> > > > > @@ -0,0 +1,73 @@
> > > > > +// SPDX-License-Identifier: GPL-2.0-only
> > > > > +//
> > > > > +// Dynamic Ftrace based Kprobes Optimization
> > > > > +//
> > > > > +// Copyright (C) 2021, Unisoc Inc.
> > > > > +// Author: Janet Liu <janet.liu@unisoc.com>
> > > > > +#include <linux/kprobes.h>
> > > > > +#include <linux/ptrace.h>
> > > > > +#include <linux/hardirq.h>
> > > > > +#include <linux/preempt.h>
> > > > > +#include <linux/ftrace.h>
> > > > > +
> > > > > +
> > > > > +/* Ftrace callback handler for kprobes*/
> > > > > +void kprobe_ftrace_handler(unsigned long ip, unsigned long parent_ip,
> > > > > + struct ftrace_ops *ops, struct ftrace_regs *fregs)
> > > > > +{
> > > > > + struct kprobe *p;
> > > > > + struct kprobe_ctlblk *kcb;
> > > > > + struct pt_regs *regs = ftrace_get_regs(fregs);
> > > > > + int bit;
> > > > > +
> > > > > + bit = ftrace_test_recursion_trylock(ip, parent_ip);
> > > > > + if (bit < 0)
> > > > > + return;
> > > > > +
> > > > > + preempt_disable_notrace();
> > > >
> > > > This already has been done in ftrace side.
> > >
> > > Hi Masami,
> > >
> > > Got it by reading code, will fix this.
> > >
> > > >
> > > > > + p = get_kprobe((kprobe_opcode_t *)ip);
> > > > > + if (unlikely(!p) || kprobe_disabled(p))
> > > > > + goto end;
> > > > > +
> > > > > + kcb = get_kprobe_ctlblk();
> > > > > + if (kprobe_running()) {
> > > > > + kprobes_inc_nmissed_count(p);
> > > > > + } else {
> > > > > + unsigned long orig_ip = instruction_pointer(regs);
> > > > > +
> > > > > + instruction_pointer_set(regs, ip);
> > > >
> > > > The 'ip' is the address of the 'bl' instruction, which must be
> > > > p->addr + AARCH64_INSN_SIZE * 2. But this is a bit strange.
> > > >
> > > > On aarch64, if the user probe callback is called from breakpoint handler,
> > > > regs->pc == kp->addr. But in this case, it is not the same.
> > > >
> > > > So, what about this?
> > > >
> > > > instruction_pointer_set(regs, ip - AARCH64_INSN_SIZE);
> > > >
> > >
> > > I got what you said.
> > >
> > > But p->addr is changed when KPROBES_ON_FTRACE enable.
> > > I implemented kprobe_lookup_name for arm64 to do the change in this patch.
> >
> > Hmm, that is no good, because printk("%pS\n", p->addr) does not show
> > what the user set by p->symbol_name. This may confuse user.
> > Moreover, if user doesn't set symbol_name but addr directly (this
> > happens when you use 'perf probe' command, which will pass the address
> > from '_text', not the function entry.
> >
>
> Hi Masami,
>
> Thanks for your explanation,if user doesn't set p->addr will not
> kprobe on ftrace entry.
> This also confuse me.

Yes, that's a headache point. This is because kprobes has two sides.
Kprobes itself should be the abstraction layer of software breakpoint,
but it also treated as an abstraction layer of flexible instrumentation.
KPROBE_ON_FTRACE feature had been introduced just for covering the
non-probable location because of ftrace. As you may know, x86 gcc
supports 'fentry' option for the ftrace, that made kprobes hard to
probe on the function entry address. To avoid this issue, I introduced
KPROBE_ON_FTRACE feature. But it also reduced overhead of the probing,
it was misunderstood as an optimization feature... (But NO, that is
just a side effect.)

Recently I started to make a 'fprobe' for function entry and exit
based on ftrace[1], thus I would like to recommend you to use it if
you intend to probe only on function entry and exit. That will
optimized for such use case.

[1] https://lore.kernel.org/all/164199616622.1247129.783024987490980883.stgit@devnote2/T/#u

And I want to keep KPROBE_ON_FTRACE as a user-nonvisible feature
for probing the ftrace location for kprobes. In this case, kprobe::addr
and kprobe::symbol_name always match. If kprobe user puts a probe on
function entry on arm64, it will keep using software breakpoint, but
if puts it on 'symbol+8', it will use ftrace to probe. That is my idea.

>
> > > because kernel/kprobe.c:check_ftrace_location check,
> > > if p->addr != ftrace_addr, don't kprobe on ftrace entry.
> > > so p->addr is equal to ftrace addr(the second nop), is equal to 'ip'.
> > > here should be instruction_pointer_set(regs, ip);
> >
> > Hmm, OK. this is a special case for the arm64 (and maybe other
> > architectures except for x86). Let's fix the check_ftrace_location().
> > We already know that 2 instructions at the beginning of function will
> > be used for ftrace on arm64. Thus arm64 version of check_ftrace_location()
> > will check the given address + 1 is ftrace location or not.
> >
> > >
> > > > > +
> > > > > + __this_cpu_write(current_kprobe, p);
> > > > > + kcb->kprobe_status = KPROBE_HIT_ACTIVE;
> > > > > + if (!p->pre_handler || !p->pre_handler(p, regs)) {
> > > > > + /*
> > > > > + *Emulate singlestep (and also recover regs->pc)
> > > > > + *as if there is a nop
> > > > > + */
> > > > > + instruction_pointer_set(regs,
> > > > > + (unsigned long)p->addr + MCOUNT_INSN_SIZE);
> > > >
> > > > And then, this will be
> > > >
> > > > instruction_pointer_set(regs,
> > > > (unsigned long)p->addr + AARCH64_INSN_SIZE * 2);
> > > >
> > > > So basically, kprobes on ftrace will skips 2 NOP instructions (the compiler installed
> > > > 2 nops) and call post handler. This means we have a virtual big NOP instruction there.
> > > >
> > > Ditto, skip two nop instructions should
> > > instruction_pointer_set(regs,
> > > (unsigned long)p->addr + AARCH64_INSN_SIZE);
> > >
> > >
> > > > > + if (unlikely(p->post_handler)) {
> > > > > + kcb->kprobe_status = KPROBE_HIT_SSDONE;
> > > > > + p->post_handler(p, regs, 0);
> > > > > + }
> > > > > + instruction_pointer_set(regs, orig_ip);
> > > > > + }
> > > > > +
> > > > > + /*
> > > > > + * If pre_handler returns !0,it changes regs->pc. We have to
> > > > > + * skip emulating post_handler.
> > > > > + */
> > > > > + __this_cpu_write(current_kprobe, NULL);
> > > > > + }
> > > > > +end:
> > > > > + preempt_enable_notrace();
> > > > > + ftrace_test_recursion_unlock(bit);
> > > > > +}
> > > > > +NOKPROBE_SYMBOL(kprobe_ftrace_handler);
> > > > > +
> > > > > +int arch_prepare_kprobe_ftrace(struct kprobe *p)
> > > > > +{
> > > > > + p->ainsn.api.insn = NULL;
> > > > > + p->ainsn.api.restore = 0;
> > > > > + return 0;
> > > > > +}
> > > > > diff --git a/arch/arm64/kernel/probes/kprobes.c b/arch/arm64/kernel/probes/kprobes.c
> > > > > index 6dbcc89f6662..3d371d3e4dfa 100644
> > > > > --- a/arch/arm64/kernel/probes/kprobes.c
> > > > > +++ b/arch/arm64/kernel/probes/kprobes.c
> > > > > @@ -417,6 +417,33 @@ int __kprobes arch_trampoline_kprobe(struct kprobe *p)
> > > > > return 0;
> > > > > }
> > > > >
> > > > > +kprobe_opcode_t __kprobes *kprobe_lookup_name(const char *name, unsigned int offset)
> > > > > +{
> > > > > + kprobe_opcode_t *addr;
> > > > > +
> > > > > + addr = (kprobe_opcode_t *)kallsyms_lookup_name(name);
> > > > > +#ifdef CONFIG_KPROBES_ON_FTRACE
> > > > > + if (addr && !offset) {
> > > > > + unsigned long faddr;
> > > > > +
> > > > > + faddr = ftrace_location_range((unsigned long)addr,
> > > > > + (unsigned long)addr + 8);
> > > >
> > > > this '8' must be (AARCH64_INSN_SIZE * 2). And here you may need to add
> > > > a comment why search the 2 instructions. (it is because arm64 uses
> > > > -fpatchable-function-entry=2.)
> > > >
> > > Got it , will fix it.
> > > > > + if (faddr)
> > > > > + addr = (kprobe_opcode_t *)faddr;
> > > > > + }
> > > This change the p->addr to ftrace_addr.
> >
> > Ah, OK. Please forgot above. What we have to do is to change the
> > check_ftrace_location(), not this conversion.
>
> I don't do this conversion, and try to implement arm64 special
> check_ftrace_location as following.
> but register kprobe fail.

Yes, it was not a good solution. Sorry.

Thank you,

>
> diff --git a/arch/arm64/kernel/probes/kprobes.c
> b/arch/arm64/kernel/probes/kprobes.c
> index d9dfa82c1f18..609f3f103a89 100644
> --- a/arch/arm64/kernel/probes/kprobes.c
> +++ b/arch/arm64/kernel/probes/kprobes.c
> +int __kprobes check_ftrace_location(struct kprobe *p)
> +{
> + unsigned long ftrace_addr;
> +
> + ftrace_addr = ftrace_location_range((unsigned long)p->addr,
> + (unsigned long)p->addr + AARCH64_INSN_SIZE * 2);
> + if (ftrace_addr) {
> +#ifdef CONFIG_KPROBES_ON_FTRACE
> + /* Given address is not on the instruction boundary */
> + if ((unsigned long)p->addr > ftrace_addr)
> + return -EILSEQ;
> + if (p->offset <= AARCH64_INSN_SIZE * 2)
> + p->flags |= KPROBE_FLAG_FTRACE;
> +#else /* !CONFIG_KPROBES_ON_FTRACE */
> + return -EINVAL;
> +#endif
> + }
> + return 0;
> +}
> +
> diff --git a/kernel/kprobes.c b/kernel/kprobes.c
> index 21eccc961bba..91c95ba4eed0 100644
> --- a/kernel/kprobes.c
> +++ b/kernel/kprobes.c
> @@ -1539,7 +1539,7 @@ static inline int warn_kprobe_rereg(struct kprobe *p)
> return ret;
> }
>
> -static int check_ftrace_location(struct kprobe *p)
> +int __weak check_ftrace_location(struct kprobe *p)
> {
> unsigned long ftrace_addr;
>
>
> __arm_kprobe_ftrace print fail info:
> [ 38.286515] Failed to arm kprobe-ftrace at kernel_clone+0x0/0x440 (error -22)
> [ 38.286606] WARNING: CPU: 3 PID: 341 at kernel/kprobes.c:1062
> arm_kprobe+0x114/0x14c
>
> __arm_kprobe_ftrace calls ftrace_set_filter_ip,
> ftrace_set_filter_ip use p->addr, but failed.
>
> Thanks
> Jianhua
>
> >
> > Thank you,
> >
> > >
> > > > > +#endif
> > > > > + return addr;
> > > > > +}
> > > > > +
> > > > > +bool __kprobes arch_kprobe_on_func_entry(unsigned long offset)
> > > > > +{
> > > > > +#ifdef CONFIG_KPROBES_ON_FTRACE
> > > > > + return offset <= 8;
> > > >
> > > > Ditto.
> > > Got it, will add comment.
> > >
> > > Thanks
> > >
> > > Jianhua
> > > >
> > > > > +#else
> > > > > + return !offset;
> > > > > +#endif
> > > > > +}
> > > > > +
> > > > > int __init arch_init_kprobes(void)
> > > > > {
> > > > > register_kernel_break_hook(&kprobes_break_hook);
> > > > > --
> > > > > 2.25.1
> > > > >
> > > >
> > > > Thank you,
> > > >
> > > >
> > > > --
> > > > Masami Hiramatsu <mhiramat@kernel.org>
> >
> >
> > --
> > Masami Hiramatsu <mhiramat@kernel.org>


--
Masami Hiramatsu <mhiramat@kernel.org>

\
 
 \ /
  Last update: 2022-01-16 16:12    [W:0.856 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site