lkml.org 
[lkml]   [2022]   [Jan]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] PCI: Reset IOV state on FLR to PF
On Fri, Jan 14, 2022 at 05:42:48PM +0800, Yicong Yang wrote:
> On 2022/1/14 0:45, Lukasz Maniak wrote:
> > On Wed, Jan 12, 2022 at 08:49:03AM -0600, Bjorn Helgaas wrote:
> >> On Wed, Dec 22, 2021 at 08:19:57PM +0100, Lukasz Maniak wrote:
> >>> As per PCI Express specification, FLR to a PF resets the PF state as
> >>> well as the SR-IOV extended capability including VF Enable which means
> >>> that VFs no longer exist.
> >>
> >> Can you add a specific reference to the spec, please?
> >>
> > Following the Single Root I/O Virtualization and Sharing Specification:
> > 2.2.3. FLR That Targets a PF
> > PFs must support FLR.
> > FLR to a PF resets the PF state as well as the SR-IOV extended
> > capability including VF Enable which means that VFs no longer exist.
> >
> > For PCI Express Base Specification Revision 5.0 and later, this is
> > section 9.2.2.3.

This is also the section in the new PCIe r6.0. Let's use that.

> >>> Currently, the IOV state is not updated during FLR, resulting in
> >>> non-compliant PCI driver behavior.
> >>
> >> And include a little detail about what problem is observed? How would
> >> a user know this problem is occurring?
> >>
> > The problem is that the state of the kernel and HW as to the number of
> > VFs gets out of sync after FLR.
> >
> > This results in further listing, after the FLR is performed by the HW,
> > of VFs that actually no longer exist and should no longer be reported on
> > the PCI bus. lspci return FFs for these VFs.
>
> There're some exceptions. Take HiSilicon's hns3 and sec device as an
> example, the VF won't be destroyed after the FLR reset.

If FLR on an hns3 PF does *not* clear VF Enable, and the VFs still
exist after FLR, isn't that a violation of sec 9.2.2.3?

If hns3 and sec don't conform to the spec, we should have some sort of
quirk that serves to document and work around this.

> Currently the transactions with the VF will be restored after the
> FLR. But this patch will break that, the VF is fully disabled and
> the transaction cannot be restored. User needs to reconfigure it,
> which is unnecessary before this patch.

What does it mean for a "transaction to be restored"? Maybe you mean
this patch removes the *VFs* via sriov_del_vfs(), and whoever
initiated the FLR would need to re-enable VFs via pci_enable_sriov()
or something similar?

If FLR disables VFs, it seems like we should expect to have to
re-enable them if we want them.

> Can we handle this problem in another way? Maybe test the VF's
> vendor device ID after the FLR reset to see whether it has really
> gone or not?
>
> > sriov_numvfs in sysfs returns old invalid value and does not allow
> > setting a new value before explicitly setting 0 in the first place.
> >
> >>> This patch introduces a simple function, called on the FLR path, that
> >>> removes the virtual function devices from the PCI bus and their
> >>> corresponding sysfs links with a final clear of the num_vfs value in IOV
> >>> state.
> >>>
> >>> Signed-off-by: Lukasz Maniak <lukasz.maniak@linux.intel.com>
> >>> ---
> >>> drivers/pci/iov.c | 21 +++++++++++++++++++++
> >>> drivers/pci/pci.c | 2 ++
> >>> drivers/pci/pci.h | 4 ++++
> >>> 3 files changed, 27 insertions(+)
> >>>
> >>> diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
> >>> index 0267977c9f17..69ee321027b4 100644
> >>> --- a/drivers/pci/iov.c
> >>> +++ b/drivers/pci/iov.c
> >>> @@ -1013,6 +1013,27 @@ int pci_iov_bus_range(struct pci_bus *bus)
> >>> return max ? max - bus->number : 0;
> >>> }
> >>>
> >>> +/**
> >>> + * pci_reset_iov_state - reset the state of the IOV capability
> >>> + * @dev: the PCI device
> >>> + */
> >>> +void pci_reset_iov_state(struct pci_dev *dev)
> >>> +{
> >>> + struct pci_sriov *iov = dev->sriov;
> >>> +
> >>> + if (!dev->is_physfn)
> >>> + return;
> >>> + if (!iov->num_VFs)
> >>> + return;
> >>> +
> >>> + sriov_del_vfs(dev);
> >>> +
> >>> + if (iov->link != dev->devfn)
> >>> + sysfs_remove_link(&dev->dev.kobj, "dep_link");
> >>> +
> >>> + iov->num_VFs = 0;
> >>> +}
> >>> +
> >>> /**
> >>> * pci_enable_sriov - enable the SR-IOV capability
> >>> * @dev: the PCI device
> >>> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> >>> index 3d2fb394986a..535f19d37e8d 100644
> >>> --- a/drivers/pci/pci.c
> >>> +++ b/drivers/pci/pci.c
> >>> @@ -4694,6 +4694,8 @@ EXPORT_SYMBOL(pci_wait_for_pending_transaction);
> >>> */
> >>> int pcie_flr(struct pci_dev *dev)
> >>> {
> >>> + pci_reset_iov_state(dev);
> >>> +
> >>> if (!pci_wait_for_pending_transaction(dev))
> >>> pci_err(dev, "timed out waiting for pending transaction; performing function level reset anyway\n");
> >>>
> >>> diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
> >>> index 3d60cabde1a1..7bb144fbec76 100644
> >>> --- a/drivers/pci/pci.h
> >>> +++ b/drivers/pci/pci.h
> >>> @@ -480,6 +480,7 @@ void pci_iov_update_resource(struct pci_dev *dev, int resno);
> >>> resource_size_t pci_sriov_resource_alignment(struct pci_dev *dev, int resno);
> >>> void pci_restore_iov_state(struct pci_dev *dev);
> >>> int pci_iov_bus_range(struct pci_bus *bus);
> >>> +void pci_reset_iov_state(struct pci_dev *dev);
> >>> extern const struct attribute_group sriov_pf_dev_attr_group;
> >>> extern const struct attribute_group sriov_vf_dev_attr_group;
> >>> #else
> >>> @@ -501,6 +502,9 @@ static inline int pci_iov_bus_range(struct pci_bus *bus)
> >>> {
> >>> return 0;
> >>> }
> >>> +static inline void pci_reset_iov_state(struct pci_dev *dev)
> >>> +{
> >>> +}
> >>>
> >>> #endif /* CONFIG_PCI_IOV */
> >>>
> >>>
> >>> base-commit: fa55b7dcdc43c1aa1ba12bca9d2dd4318c2a0dbf
> >>> --
> >>> 2.25.1
> >>>
> > .
> >

\
 
 \ /
  Last update: 2022-01-14 17:38    [W:0.928 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site