lkml.org 
[lkml]   [2022]   [Jan]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] stmmac: intel: Honor phy LED set by system firmware on a Dell hardware
>  static void marvell_config_led(struct phy_device *phydev)
> {
> - u16 def_config;
> + struct marvell_priv *priv = phydev->priv;
> int err;
>
> - switch (MARVELL_PHY_FAMILY_ID(phydev->phy_id)) {
> - /* Default PHY LED config: LED[0] .. Link, LED[1] .. Activity */
> - case MARVELL_PHY_FAMILY_ID(MARVELL_PHY_ID_88E1121R):
> - case MARVELL_PHY_FAMILY_ID(MARVELL_PHY_ID_88E1318S):
> - def_config = MII_88E1121_PHY_LED_DEF;
> - break;
> - /* Default PHY LED config:
> - * LED[0] .. 1000Mbps Link
> - * LED[1] .. 100Mbps Link
> - * LED[2] .. Blink, Activity
> - */
> - case MARVELL_PHY_FAMILY_ID(MARVELL_PHY_ID_88E1510):
> - if (phydev->dev_flags & MARVELL_PHY_LED0_LINK_LED1_ACTIVE)
> - def_config = MII_88E1510_PHY_LED0_LINK_LED1_ACTIVE;
> - else
> - def_config = MII_88E1510_PHY_LED_DEF;
> - break;
> - default:
> + if (priv->led_def_config == -1)
> return;
> +
> + if (priv->led_def_config)
> + goto write;

Really?

Please restructure this code. Take it apart into helpers. You need:

A function to set the actual LED configuration.
A function to decide what, if any, configuration to set
A function to store the current configuration on suspend.
A function to restore the current configuration on resume.

Lots of little functions will make it much easier to understand, and
avoid 1980s BASIC style.

I'm also surprised you need to deal with suspend/resume. Why does the
BIOS not set the LED mode on resume, same as it does on power up?

Andrew

\
 
 \ /
  Last update: 2022-01-14 14:21    [W:0.381 / U:0.836 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site