lkml.org 
[lkml]   [2022]   [Jan]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 1/2] ARM: dts: aspeed: rainier: add reset-cause-pinhole
Hi Andrew,

On Thu, 13 Jan 2022 at 21:18, Andrew Geissler <geissonator@gmail.com> wrote:
>
> This GPIO is used on the rainier system to indicate the BMC was reset
> due to a physical pinhole reset.
>
> See the following doc for more information:
> https://github.com/openbmc/docs/blob/master/designs/device-tree-gpio-naming.md
>
> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>

I couldn't apply these cleanly to any tree I had. I think you had a
patch to add battery-voltage-read-enable, but that's not in the tree
yet.

I fixed them up to apply.

Cheers,

Joel

> ---
> arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
> index cfaa606666e2..7ea70c7d698f 100644
> --- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
> +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
> @@ -247,7 +247,8 @@ &gpio0 {
> /*C0-C7*/ "","","","","","","","",
> /*D0-D7*/ "","","","","","","","",
> /*E0-E7*/ "","","","","","","","",
> - /*F0-F7*/ "","","battery-voltage-read-enable","","","","factory-reset-toggle","",
> + /*F0-F7*/ "","","battery-voltage-read-enable","reset-cause-pinhole","","",
> + "factory-reset-toggle","",
> /*G0-G7*/ "","","","","","","","",
> /*H0-H7*/ "","bmc-ingraham0","rear-enc-id0","rear-enc-fault0","","","","",
> /*I0-I7*/ "","","","","","","bmc-secure-boot","",
> --
> 2.25.1
>

\
 
 \ /
  Last update: 2022-01-13 23:37    [W:0.031 / U:1.284 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site