lkml.org 
[lkml]   [2022]   [Jan]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v6 2/2] serial:sunplus-uart:Add Sunplus SoC UART Driver
From
Hi,

On 12. 01. 22, 10:24, Hammer Hsieh wrote:
> Add Sunplus SoC UART Driver
...
> --- /dev/null
> +++ b/drivers/tty/serial/sunplus-uart.c
> @@ -0,0 +1,756 @@
...
> +/* Register offsets */
> +#define SUP_UART_DATA 0x00
> +#define SUP_UART_LSR 0x04
> +#define SUP_UART_MSR 0x08
> +#define SUP_UART_LCR 0x0C
> +#define SUP_UART_MCR 0x10
> +#define SUP_UART_DIV_L 0x14
> +#define SUP_UART_DIV_H 0x18
> +#define SUP_UART_ISC 0x1C
> +#define SUP_UART_TX_RESIDUE 0x20
> +#define SUP_UART_RX_RESIDUE 0x24
> +
> +/* Line Status Register bits */
> +#define SUP_UART_LSR_BC BIT(5) /* break condition status */
> +#define SUP_UART_LSR_FE BIT(4) /* frame error status */
> +#define SUP_UART_LSR_OE BIT(3) /* overrun error status */
> +#define SUP_UART_LSR_PE BIT(2) /* parity error status */

I just wonder why do the HW creators feel so creative to redefine the
world...

> +static void sunplus_shutdown(struct uart_port *port)
> +{
> + unsigned long flags;
> +
> + spin_lock_irqsave(&port->lock, flags);
> + writel(0, port->membase + SUP_UART_ISC);
> + spin_unlock_irqrestore(&port->lock, flags);

I asked last time:
* What bus is this -- posting?

You replied:
* Here just clear interrupt.
* Not really understand your comment?

So I am asking again:
What bus is this? Isn't a posted write a problem here? I mean, shouldn't
you read from the register so that the write hits the device? That
depends on the bus this sits on, so just asking.

Other than that the driver looks much better now, i.e. LGTM.

thanks,
--
js
suse labs

\
 
 \ /
  Last update: 2022-01-13 08:06    [W:0.221 / U:0.268 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site