lkml.org 
[lkml]   [2022]   [Jan]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH 1/5] kvm: add exit_to_guest_mode() and enter_from_guest_mode()
On Tue, Jan 11, 2022 at 05:54:59PM +0000, Marc Zyngier wrote:
> Hi Mark,
>
> On Tue, 11 Jan 2022 15:35:35 +0000,
> Mark Rutland <mark.rutland@arm.com> wrote:
> >
> > When transitioning to/from guest mode, it is necessary to inform
> > lockdep, tracing, and RCU in a specific order, similar to the
> > requirements for transitions to/from user mode. Additionally, it is
> > necessary to perform vtime accounting for a window around running the
> > guest, with RCU enabled, such that timer interrupts taken from the guest
> > can be accounted as guest time.
> >
> > Most architectures don't handle all the necessary pieces, and a have a
> > number of common bugs, including unsafe usage of RCU during the window
> > between guest_enter() and guest_exit().
> >
> > On x86, this was dealt with across commits:
> >
> > 87fa7f3e98a1310e ("x86/kvm: Move context tracking where it belongs")
> > 0642391e2139a2c1 ("x86/kvm/vmx: Add hardirq tracing to guest enter/exit")
> > 9fc975e9efd03e57 ("x86/kvm/svm: Add hardirq tracing on guest enter/exit")
> > 3ebccdf373c21d86 ("x86/kvm/vmx: Move guest enter/exit into .noinstr.text")
> > 135961e0a7d555fc ("x86/kvm/svm: Move guest enter/exit into .noinstr.text")
> > 160457140187c5fb ("KVM: x86: Defer vtime accounting 'til after IRQ handling")
> > bc908e091b326467 ("KVM: x86: Consolidate guest enter/exit logic to common helpers")
> >
> > ... but those fixes are specific to x86, and as the resulting logic
> > (while correct) is split across generic helper functions and
> > x86-specific helper functions, it is difficult to see that the
> > entry/exit accounting is balanced.
> >
> > This patch adds generic helpers which architectures can use to handle
> > guest entry/exit consistently and correctly. The guest_{enter,exit}()
> > helpers are split into guest_timing_{enter,exit}() to perform vtime
> > accounting, and guest_context_{enter,exit}() to perform the necessary
> > context tracking and RCU management. The existing guest_{enter,exit}()
> > heleprs are left as wrappers of these.
> >
> > Atop this, new exit_to_guest_mode() and enter_from_guest_mode() helpers
> > are added to handle the ordering of lockdep, tracing, and RCU manageent.
> > These are named to align with exit_to_user_mode() and
> > enter_from_user_mode().
> >
> > Subsequent patches will migrate architectures over to the new helpers,
> > following a sequence:
> >
> > guest_timing_enter_irqoff();
> >
> > exit_to_guest_mode();
> > < run the vcpu >
> > enter_from_guest_mode();
> >
> > < take any pending IRQs >
> >
> > guest_timing_exit_irqoff();
> >
> > This sequences handles all of the above correctly, and more clearly
> > balances the entry and exit portions, making it easier to understand.
> >
> > The existing helpers are marked as deprecated, and will be removed once
> > all architectures have been converted.
> >
> > There should be no functional change as a result of this patch.
> >
> > Signed-off-by: Mark Rutland <mark.rutland@arm.com>
>
> Thanks a lot for looking into this and writing this up. I have a
> couple of comments below, but that's pretty much cosmetic and is only
> there to ensure that I actually understand this stuff. FWIW:
>
> Reviewed-by: Marc Zyngier <maz@kernel.org>

Thanks!

> > ---
> > include/linux/kvm_host.h | 108 +++++++++++++++++++++++++++++++++++++--
> > 1 file changed, 105 insertions(+), 3 deletions(-)
> >
> > diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h
> > index c310648cc8f1..13fcf7979880 100644
> > --- a/include/linux/kvm_host.h
> > +++ b/include/linux/kvm_host.h
> > @@ -29,6 +29,8 @@
> > #include <linux/refcount.h>
> > #include <linux/nospec.h>
> > #include <linux/notifier.h>
> > +#include <linux/ftrace.h>
> > +#include <linux/instrumentation.h>
> > #include <asm/signal.h>
> >
> > #include <linux/kvm.h>
> > @@ -362,8 +364,11 @@ struct kvm_vcpu {
> > int last_used_slot;
> > };
> >
> > -/* must be called with irqs disabled */
> > -static __always_inline void guest_enter_irqoff(void)
> > +/*
> > + * Start accounting time towards a guest.
> > + * Must be called before entering guest context.
> > + */
> > +static __always_inline void guest_timing_enter_irqoff(void)
> > {
> > /*
> > * This is running in ioctl context so its safe to assume that it's the
> > @@ -372,7 +377,17 @@ static __always_inline void guest_enter_irqoff(void)
> > instrumentation_begin();
> > vtime_account_guest_enter();
> > instrumentation_end();
> > +}
> >
> > +/*
> > + * Enter guest context and enter an RCU extended quiescent state.
> > + *
> > + * This should be the last thing called before entering the guest, and must be
> > + * called after any potential use of RCU (including any potentially
> > + * instrumented code).
>
> nit: "the last thing called" is terribly ambiguous. Any architecture
> obviously calls a ****load of stuff after this point. Should this be
> 'the last thing involving RCU' instead?

I agree this is unclear and I struggled to fing good wording for this. Is the
following any better?

/*
* Enter guest context and enter an RCU extended quiescent state.
*
* Between guest_context_enter_irqoff() and guest_context_exit_irqoff() it is
* unsafe to use any code which may directly or indirectly use RCU, tracing
* (including IRQ flag tracing), or lockdep. All code in this period must be
* non-instrumentable.
*/
If that's good I can add similar to guest_context_exit_irqoff().

[...]

> > +/**
> > + * exit_to_guest_mode - Fixup state when exiting to guest mode
> > + *
> > + * This is analagous to exit_to_user_mode(), and ensures we perform the
> > + * following in order:
> > + *
> > + * 1) Trace interrupts on state
> > + * 2) Invoke context tracking if enabled to adjust RCU state
> > + * 3) Tell lockdep that interrupts are enabled
>
> nit: or rather, are about to be enabled? Certainly on arm64, the
> enable happens much later, right at the point where we enter the guest
> for real.

True; I'd cribbed the wording from the comment block above exit_to_user_mode(),
but I stripped the context that made that clear. I'll make that:

/**
* exit_to_guest_mode - Fixup state when exiting to guest mode
*
* Entry to a guest will enable interrupts, but the kernel state is
* interrupts disabled when this is invoked. Also tell RCU about it.
*
* 1) Trace interrupts on state
* 2) Invoke context tracking if enabled to adjust RCU state
* 3) Tell lockdep that interrupts are enabled
*
* Invoked from architecture specific code before entering a guest.
* Must be called with interrupts disabled and the caller must be
* non-instrumentable.
* The caller has to invoke guest_timing_enter_irqoff() before this.
*
* Note: this is analagous to exit_to_user_mode().
*/
... with likewise for enter_from_guest_mode(), if that's clear enough?

FWIW, the comment blcok for exit_to_user_mode() in
include/linux/entry-common.h says:

/**
* exit_to_user_mode - Fixup state when exiting to user mode
*
* Syscall/interrupt exit enables interrupts, but the kernel state is
* interrupts disabled when this is invoked. Also tell RCU about it.
*
* 1) Trace interrupts on state
* 2) Invoke context tracking if enabled to adjust RCU state
* 3) Invoke architecture specific last minute exit code, e.g. speculation
* mitigations, etc.: arch_exit_to_user_mode()
* 4) Tell lockdep that interrupts are enabled
*
* Invoked from architecture specific code when syscall_exit_to_user_mode()
* is not suitable as the last step before returning to userspace. Must be
* invoked with interrupts disabled and the caller must be
* non-instrumentable.
* The caller has to invoke syscall_exit_to_user_mode_work() before this.
*/
Thanks,
Mark.

\
 
 \ /
  Last update: 2022-01-13 12:02    [W:0.113 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site