lkml.org 
[lkml]   [2022]   [Jan]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 7/7] Bluetooth: btmtksdio: mask out interrupt status
Date
From: Sean Wang <sean.wang@mediatek.com>

Currently, there is a loop in btmtksdio_txrx_work() which iteratively
executes until the variable int_status is zero.

But the variable int_status should be masked out with the actual interrupt
sources (MTK_REG_CHISR bit 0-15) before we check the loop condition.
Otherwise, RX_PKT_LEN (MTK_REG_CHISR bit 16-31) which is read-only and
unclearable would cause the loop to get stuck on some chipsets like
MT7663s.

Fixes: 26270bc189ea ("Bluetooth: btmtksdio: move interrupt service to work")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
drivers/bluetooth/btmtksdio.c | 2 ++
1 file changed, 2 insertions(+)

diff --git a/drivers/bluetooth/btmtksdio.c b/drivers/bluetooth/btmtksdio.c
index 491f029452ca..8be763ab3bf4 100644
--- a/drivers/bluetooth/btmtksdio.c
+++ b/drivers/bluetooth/btmtksdio.c
@@ -92,6 +92,7 @@ MODULE_DEVICE_TABLE(sdio, btmtksdio_table);
#define TX_EMPTY BIT(2)
#define TX_FIFO_OVERFLOW BIT(8)
#define FW_MAILBOX_INT BIT(15)
+#define INT_MASK GENMASK(15, 0)
#define RX_PKT_LEN GENMASK(31, 16)

#define MTK_REG_CSICR 0xc0
@@ -565,6 +566,7 @@ static void btmtksdio_txrx_work(struct work_struct *work)
* FIFO.
*/
sdio_writel(bdev->func, int_status, MTK_REG_CHISR, NULL);
+ int_status &= INT_MASK;

if ((int_status & FW_MAILBOX_INT) &&
bdev->data->chipid == 0x7921) {
--
2.25.1
\
 
 \ /
  Last update: 2022-01-12 08:41    [W:0.693 / U:0.384 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site