lkml.org 
[lkml]   [2022]   [Jan]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH] PCI: Add "pci=reassign_all_bus" boot parameter
On Thu, Dec 30, 2021 at 05:30:13PM +0800, Yao Hongbo wrote:
> PCI bridges may be misconfigured by te system BIOS, and then the OS
> scan the bridges that need to be reconfigured.
> However, the PCI bus topology configured by the bios may be wrong:
>
> [ 19.376273] pci 0000:40:00.0: bridge configuration invalid ([bus
> 00-00]), reconfiguring
> [ 19.384443] pci_bus 0000:47: busn_res: can not insert [bus 47-46]
> under [bus 40-46] (conflicts with (null) [bus 40-46])
>
> The primary bus number and subordinate bus number written by the bios
> were wrong, and the OS continues to add bridges on the wrong bus
> topology.
>
> In order to avoid such problems, a kernel cmdline needs to be
> added to support the os to fully configure the pci bus.

Why can't we make Linux smart enough to fix this by itself, without
forcing the user to boot with "pci=reassign_all_bus"?

> Signed-off-by: Yao Hongbo <yaohongbo@linux.alibaba.com>
> ---
> Documentation/admin-guide/kernel-parameters.txt | 1 +
> drivers/acpi/pci_root.c | 3 +++
> drivers/pci/pci.c | 5 +++++
> include/linux/pci.h | 2 ++
> 4 files changed, 11 insertions(+)
>
> diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
> index 2fba824..c83a2e5 100644
> --- a/Documentation/admin-guide/kernel-parameters.txt
> +++ b/Documentation/admin-guide/kernel-parameters.txt
> @@ -4084,6 +4084,7 @@
> nomio [S390] Do not use MIO instructions.
> norid [S390] ignore the RID field and force use of
> one PCI domain per PCI function
> + reassign_all_bus The OS fully configure the PCI bus.
>
> pcie_aspm= [PCIE] Forcibly enable or disable PCIe Active State Power
> Management.
> diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
> index ab2f7df..e21ac25 100644
> --- a/drivers/acpi/pci_root.c
> +++ b/drivers/acpi/pci_root.c
> @@ -592,6 +592,9 @@ static int acpi_pci_root_add(struct acpi_device *device,
> is_pcie = strcmp(acpi_device_hid(device), "PNP0A08") == 0;
> negotiate_os_control(root, &no_aspm, is_pcie);
>
> + if (pci_reassign_all_bus)
> + pci_add_flags(PCI_REASSIGN_ALL_BUS);
> +
> /*
> * TBD: Need PCI interface for enumeration/configuration of roots.
> */
> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> index 3d2fb39..5746e88 100644
> --- a/drivers/pci/pci.c
> +++ b/drivers/pci/pci.c
> @@ -142,6 +142,9 @@ bool pci_reset_supported(struct pci_dev *dev)
> /* If set, the PCI config space of each device is printed during boot. */
> bool pci_early_dump;
>
> +/* If set, the pci will reassign resources*/
> +bool pci_reassign_all_bus;
> +
> bool pci_ats_disabled(void)
> {
> return pcie_ats_disabled;
> @@ -6846,6 +6849,8 @@ static int __init pci_setup(char *str)
> pci_add_flags(PCI_SCAN_ALL_PCIE_DEVS);
> } else if (!strncmp(str, "disable_acs_redir=", 18)) {
> disable_acs_redir_param = str + 18;
> + } else if (!strncmp(str, "reassign_all_bus", 16)) {
> + pci_reassign_all_bus = true;
> } else {
> pr_err("PCI: Unknown option `%s'\n", str);
> }
> diff --git a/include/linux/pci.h b/include/linux/pci.h
> index 18a75c8e..ad0e3e9 100644
> --- a/include/linux/pci.h
> +++ b/include/linux/pci.h
> @@ -2119,6 +2119,8 @@ int pcim_iomap_regions_request_all(struct pci_dev *pdev, int mask,
> extern u8 pci_dfl_cache_line_size;
> extern u8 pci_cache_line_size;
>
> +extern bool pci_reassign_all_bus;
> +
> /* Architecture-specific versions may override these (weak) */
> void pcibios_disable_device(struct pci_dev *dev);
> void pcibios_set_master(struct pci_dev *dev);
> --
> 1.8.3.1
>

\
 
 \ /
  Last update: 2022-01-12 16:43    [W:0.064 / U:1.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site