lkml.org 
[lkml]   [2022]   [Jan]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: (EXT) Re: [PATCH] arm64: dts: imx8mm-venice-gw73xx-0x: add dt overlays for serial modes
Date
Am Dienstag, 11. Januar 2022, 01:00:21 CET schrieb Tim Harvey:
> [SNIP]
> > diff --git a/arch/arm64/boot/dts/freescale/Makefile
> > b/arch/arm64/boot/dts/freescale/Makefile index a14a6173b765..5ec8d59347b6
> > 100644
> > --- a/arch/arm64/boot/dts/freescale/Makefile
> > +++ b/arch/arm64/boot/dts/freescale/Makefile
> > @@ -44,6 +44,9 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-var-som-symphony.dtb
> >
> > dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw71xx-0x.dtb
> > dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x.dtb
> > dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x.dtb
> >
> > +dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x-rs232-rts.dtbo
> > +dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x-rs422.dtbo
> > +dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x-rs485.dtbo
> >
> > dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7901.dtb
> > dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7902.dtb
> > dtb-$(CONFIG_ARCH_MXC) += imx8mn-beacon-kit.dtb
> >
> [SNIP]
> I'm mostly interested to see if my approach to dt fragments here and
> the naming of the files makes sense to others.
>
> This patch causes the kernel to build dtbo files for:
> arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs232-rts.dtbo
> arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs422.dtbo
> arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs485.dtbo
>
> The intention is that these files are used by boot firmware (U-Boot)
> to adjust the dtb before passing it to the kernel.

Hi Tim,

do these dtbo actually work? I'm wondering because I was trying to useoverlays
myself and noticed that the had to be compiled with -@ for u-boot to be able
to apply them. Apparently there are 2 possibilities:
* Set "DTC_FLAGS_[dtb] := -@" yourself
See https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/
commit/?id=e426d63e752bdbe7d5ba2d872319dde9ab844a07

* Use dedicated overlay target
See https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/
commit/?id=15d16d6dadf6947ac7f9a686c615995c5a426ce2

You use neither of them. IIRC just naming the target file .dtbo will not apply
symbols (-Q) during dtc call. Can you verify using 'V=1'
Also I'm wondering which way is the best to go.

Best regards,
Alexander



\
 
 \ /
  Last update: 2022-01-11 08:21    [W:0.063 / U:0.680 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site