lkml.org 
[lkml]   [2022]   [Jan]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 2/3] hwmon: (asus-ec-sensors) update documentation
Date
Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
---
Documentation/hwmon/asus_ec_sensors.rst | 51 +++++++++++++++++++++
Documentation/hwmon/asus_wmi_ec_sensors.rst | 38 ---------------
2 files changed, 51 insertions(+), 38 deletions(-)
create mode 100644 Documentation/hwmon/asus_ec_sensors.rst
delete mode 100644 Documentation/hwmon/asus_wmi_ec_sensors.rst

diff --git a/Documentation/hwmon/asus_ec_sensors.rst b/Documentation/hwmon/asus_ec_sensors.rst
new file mode 100644
index 000000000000..b8820cd1bd62
--- /dev/null
+++ b/Documentation/hwmon/asus_ec_sensors.rst
@@ -0,0 +1,51 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Kernel driver asus_ec_sensors
+=================================
+
+Supported boards:
+ * PRIME X570-PRO,
+ * Pro WS X570-ACE,
+ * ROG CROSSHAIR VIII DARK HERO,
+ * ROG CROSSHAIR VIII FORMULA,
+ * ROG CROSSHAIR VIII HERO,
+ * ROG CROSSHAIR VIII IMPACT,
+ * ROG STRIX B550-E GAMING,
+ * ROG STRIX B550-I GAMING,
+ * ROG STRIX X570-E GAMING,
+ * ROG STRIX X570-I GAMING
+
+Authors:
+ - Eugene Shalygin <eugene.shalygin@gmail.com>
+
+Description:
+------------
+ASUS mainboards publish hardware monitoring information via Super I/O
+chip and the ACPI embedded controller (EC) registers. Some of the sensors
+are only available via the EC.
+
+The driver is aware of and reads the following sensors:
+
+1. Chipset (PCH) temperature
+2. CPU package temperature
+3. Motherboard temperature
+4. Readings from the T_Sensor header
+5. VRM temperature
+6. CPU_Opt fan RPM
+7. VRM heatsink fan RPM
+8. Chipset fan RPM
+9. Readings from the "Water flow meter" header (RPM)
+10. Readings from the "Water In" and "Water Out" temperature headers
+11. CPU current
+
+Sensor values are read from EC registers, and to avoid race with the board
+firmware the driver acquires ACPI mutex, the one used by the WMI when its
+methods access the EC.
+
+Module Parameters
+-----------------
+ * mutex_path: string
+ The driver holds path to the ACPI mutex for each board (actually,
+ the path is mostly identical for them). If ASUS changes this path
+ in a future BIOS update, this parameter can be used to override
+ the stored in the driver value until it gets updated.
diff --git a/Documentation/hwmon/asus_wmi_ec_sensors.rst b/Documentation/hwmon/asus_wmi_ec_sensors.rst
deleted file mode 100644
index 1b287f229e86..000000000000
--- a/Documentation/hwmon/asus_wmi_ec_sensors.rst
+++ /dev/null
@@ -1,38 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0-or-later
-
-Kernel driver asus_wmi_ec_sensors
-=================================
-
-Supported boards:
- * PRIME X570-PRO,
- * Pro WS X570-ACE,
- * ROG CROSSHAIR VIII DARK HERO,
- * ROG CROSSHAIR VIII FORMULA,
- * ROG CROSSHAIR VIII HERO,
- * ROG STRIX B550-E GAMING,
- * ROG STRIX B550-I GAMING,
- * ROG STRIX X570-E GAMING.
-
-Authors:
- - Eugene Shalygin <eugene.shalygin@gmail.com>
-
-Description:
-------------
-ASUS mainboards publish hardware monitoring information via Super I/O
-chip and the ACPI embedded controller (EC) registers. Some of the sensors
-are only available via the EC.
-
-ASUS WMI interface provides a method (BREC) to read data from EC registers,
-which is utilized by this driver to publish those sensor readings to the
-HWMON system. The driver is aware of and reads the following sensors:
-
-1. Chipset (PCH) temperature
-2. CPU package temperature
-3. Motherboard temperature
-4. Readings from the T_Sensor header
-5. VRM temperature
-6. CPU_Opt fan RPM
-7. Chipset fan RPM
-8. Readings from the "Water flow meter" header (RPM)
-9. Readings from the "Water In" and "Water Out" temperature headers
-10. CPU current
--
2.34.1
\
 
 \ /
  Last update: 2022-01-11 19:05    [W:0.093 / U:0.724 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site