lkml.org 
[lkml]   [2022]   [Jan]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 02/12] RISC-V: MAXPHYSMEM_2GB doesn't depend on CMODEL_MEDLOW
From
Hi Geert,

On 1/11/22 17:04, Geert Uytterhoeven wrote:
> Hi Palmer,
>
> On Fri, Nov 19, 2021 at 5:47 PM Palmer Dabbelt <palmer@rivosinc.com> wrote:
>> From: Palmer Dabbelt <palmer@rivosinc.com>
>>
>> For non-relocatable kernels we need to be able to link the kernel at
>> approximately PAGE_OFFSET, thus requiring medany (as medlow requires the
>> code to be linked within 2GiB of 0). The inverse doesn't apply, though:
>> since medany code can be linked anywhere it's fine to link it close to
>> 0, so we can support the smaller memory config.
>>
>> Fixes: de5f4b8f634b ("RISC-V: Define MAXPHYSMEM_1GB only for RV32")
>> Cc: stable@vger.kernel.org
>> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
> Thanks for your patch, which is now commit 9f36b96bc70f9707 ("RISC-V:
> MAXPHYSMEM_2GB doesn't depend on CMODEL_MEDLOW").
>
>> I found this when going through the savedefconfig diffs for the K210
>> defconfigs. I'm not entirely sure they're doing the right thing here
>> (they should probably be setting CMODEL_LOW to take advantage of the
>> better code generation), but I don't have any way to test those
>> platforms so I don't want to change too much.
> I can confirm MAXPHYSMEM_2GB works on K210 with CMODEL_MEDANY.
>
> As the Icicle has 1760 MiB of RAM, I gave it a try with MAXPHYSMEM_2GB
> (and CMODEL_MEDANY), too. Unfortunately it crashes very early
> (needs earlycon to see):
>
> OF: fdt: Ignoring memory range 0x80000000 - 0x80200000
> Machine model: Microchip PolarFire-SoC Icicle Kit
> printk: debug: ignoring loglevel setting.
> earlycon: ns16550a0 at MMIO32 0x0000000020100000 (options '115200n8')
> printk: bootconsole [ns16550a0] enabled
> printk: debug: skip boot console de-registration.
> efi: UEFI not found.
> Unable to handle kernel paging request at virtual address ffffffff87e00001
> Oops [#1]
> Modules linked in:
> CPU: 0 PID: 0 Comm: swapper Not tainted 5.16.0-08771-g85515233477d #56
> Hardware name: Microchip PolarFire-SoC Icicle Kit (DT)
> epc : fdt_check_header+0x14/0x208
> ra : early_init_dt_verify+0x16/0x94
> epc : ffffffff802ddacc ra : ffffffff8082415a sp : ffffffff81203ee0
> gp : ffffffff812ec3a8 tp : ffffffff8120cd80 t0 : 0000000000000005
> t1 : 0000001040000000 t2 : ffffffff80000000 s0 : ffffffff81203f00
> s1 : ffffffff87e00000 a0 : ffffffff87e00000 a1 : 000000040ffffce7
> a2 : 00000000000000e7 a3 : ffffffff8080394c a4 : 0000000000000000
> a5 : 0000000000000000 a6 : 0000000000000000 a7 : 0000000000000000
> s2 : ffffffff81203f98 s3 : 8000000a00006800 s4 : fffffffffffffff3
> s5 : 0000000000000000 s6 : 0000000000000001 s7 : 0000000000000000
> s8 : 0000000020236c20 s9 : 0000000000000000 s10: 0000000000000000
> s11: 0000000000000000 t3 : 0000000000000018 t4 : 00ff000000000000
> t5 : 0000000000000000 t6 : 0000000000000010
> status: 0000000200000100 badaddr: ffffffff87e00001 cause: 000000000000000d
> [<ffffffff802ddacc>] fdt_check_header+0x14/0x208
> [<ffffffff8082415a>] early_init_dt_verify+0x16/0x94
> [<ffffffff80802dee>] setup_arch+0xec/0x4ec
> [<ffffffff80800700>] start_kernel+0x88/0x6d6
> random: get_random_bytes called from
> print_oops_end_marker+0x22/0x44 with crng_init=0
> ---[ end trace 903df1a0ade0b876 ]---
> Kernel panic - not syncing: Attempted to kill the idle task!
> ---[ end Kernel panic - not syncing: Attempted to kill the idle task! ]---
>
> So the FDT is at 0xffffffff87e00000, i.e. at 0x7e00000 from the start
> of virtual memory (CONFIG_PAGE_OFFSET=0xffffffff80000000), and thus
> within the 2 GiB range.


I think you have just encountered what I suspected and mentioned in [1]:
we recently moved the kernel to the PAGE_OFFSET address used with
MAXPHYSMEM_2GB.

I would try to cherry-pick [1] and see if that works better :)

Alex

[1]
https://patchwork.kernel.org/project/linux-riscv/patch/20211206104657.433304-6-alexandre.ghiti@canonical.com/


>
>> --- a/arch/riscv/Kconfig
>> +++ b/arch/riscv/Kconfig
>> @@ -280,7 +280,7 @@ choice
>> depends on 32BIT
>> bool "1GiB"
>> config MAXPHYSMEM_2GB
>> - depends on 64BIT && CMODEL_MEDLOW
>> + depends on 64BIT
>> bool "2GiB"
>> config MAXPHYSMEM_128GB
>> depends on 64BIT && CMODEL_MEDANY
> Gr{oetje,eeting}s,
>
> Geert
>
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
>
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
> -- Linus Torvalds
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv

\
 
 \ /
  Last update: 2022-01-11 17:15    [W:0.112 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site