lkml.org 
[lkml]   [2022]   [Jan]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH 1/9] dt-bindings: remoteproc: imx_rproc: support i.MX8QXP
Date
> Subject: [PATCH 1/9] dt-bindings: remoteproc: imx_rproc: support i.MX8QXP

+Rob

>
> From: Peng Fan <peng.fan@nxp.com>
>
> Add i.MX8QXP compatible
>
> Add a new property rsrc-id for SoC which supports SCFW. This rsrc-id is used
> to check whether remote process is under control of Linux or not.
>
> To i.MX8QM/QXP, when M4 is in the same hardware partition with Cortex-A
> cores, need power up M4 through SCFW, then M4 could start. So introduce
> power-domains property
>
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---
> .../devicetree/bindings/remoteproc/fsl,imx-rproc.yaml | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git
> a/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
> b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
> index fc16d903353e..ed1bcb3046a9 100644
> --- a/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
> +++ b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
> @@ -19,6 +19,7 @@ properties:
> - fsl,imx8mm-cm4
> - fsl,imx8mn-cm7
> - fsl,imx8mp-cm7
> + - fsl,imx8qxp-cm4
> - fsl,imx8ulp-cm33
> - fsl,imx7d-cm4
> - fsl,imx7ulp-cm4
> @@ -59,6 +60,15 @@ properties:
> Indicate whether need to load the default firmware and start the
> remote
> processor automatically.
>
> + power-domains:
> + maxItems: 8
> +
> + rsrc-id:
> + description:
> + This property is to specify the resource id of the remote processor in
> SoC
> + which supports SCFW
> + maxItems: 1
> +
> required:
> - compatible
>
> --
> 2.25.1

\
 
 \ /
  Last update: 2022-01-11 07:45    [W:0.177 / U:0.368 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site