lkml.org 
[lkml]   [2022]   [Jan]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v12 0/5] Add Xilinx AMS Driver
On Mon, 10 Jan 2022 05:17:26 +0000
Anand Ashok Dumbre <ANANDASH@xilinx.com> wrote:

> Hi Cameron,
>
> I see in the patchwork that the patches have been accepted.
> When can I expect to see the driver in mainline?

The merge window just opened today, and these were in a pull request
to Greg, so he has them in his char-misc tree.

So, now we just have to wait for Greg to send a pull request to Linus
and Linus to pull it. That should happen sometime in next 2 weeks in
time for rc1.

Jonathan

>
> Thanks,
> Anand
>
> > -----Original Message-----
> > From: Jonathan Cameron <jic23@kernel.org>
> > Sent: Thursday 16 December 2021 5:07 PM
> > To: Anand Ashok Dumbre <ANANDASH@xilinx.com>
> > Cc: linux-kernel@vger.kernel.org; lars@metafoo.de; linux-
> > iio@vger.kernel.org; git <git@xilinx.com>; Michal Simek
> > <michals@xilinx.com>; gregkh@linuxfoundation.org; rafael@kernel.org;
> > linux-acpi@vger.kernel.org; heikki.krogerus@linux.intel.com; Andy
> > Shevchenko <andriy.shevchenko@linux.intel.com>; 'Anand Dumbre'
> > <ananddumbre8@gmail.com>
> > Subject: Re: [PATCH v12 0/5] Add Xilinx AMS Driver
> >
> > On Wed, 15 Dec 2021 12:11:21 +0000
> > Anand Ashok Dumbre <ANANDASH@xilinx.com> wrote:
> >
> > > Ping!
> >
> > Other than ideally getting a few more eyes on the stuff in drivers/base I'm
> > fine with this series.
> >
> > Thanks,
> >
> > Jonathan
> >
> > >
> > > > -----Original Message-----
> > > > From: Anand Ashok Dumbre <anand.ashok.dumbre@xilinx.com>
> > > > Sent: Friday 3 December 2021 9:24 PM
> > > > To: linux-kernel@vger.kernel.org; jic23@kernel.org; lars@metafoo.de;
> > > > linux- iio@vger.kernel.org; git <git@xilinx.com>; Michal Simek
> > > > <michals@xilinx.com>; gregkh@linuxfoundation.org; rafael@kernel.org;
> > > > linux-acpi@vger.kernel.org; heikki.krogerus@linux.intel.com
> > > > Cc: Anand Ashok Dumbre <ANANDASH@xilinx.com>
> > > > Subject: [PATCH v12 0/5] Add Xilinx AMS Driver
> > > >
> > > > Add Xilinx AMS driver which is used for Xilinx's ZynqMP AMS controller.
> > > > This AMS driver is used to report various interface voltages and
> > > > temperatures across the system.
> > > > This driver will be used by iio-hwmon to repport voltages and
> > > > temperatures across the system by using various channel interfaces.
> > > > This driver handles AMS module including PS-Sysmon & PL-Sysmon. The
> > > > binding documentation is added for understanding of AMS, PS, PL
> > > > Sysmon Channels.
> > > >
> > > > Changes in v2:
> > > > - Added documentation for sysfs (Patch-2)
> > > > - Addressed code style review comments
> > > > - Patch-2 (Now it is Patch-3)
> > > > - Arranged the includes in alphabetical order
> > > > - Removed the wrapper 'ams_pl_write_reg()' and used writel
> > > > instead
> > > > - Removed the unnecessary delay of 1ms and used polling of
> > EOC
> > > > instead
> > > > - Removed spin_lock and used mutex only.
> > > > - Used request_irq() instead of devm_request_irq() and
> > handled
> > > > respective error conditions
> > > > - Moved contents of xilinx-ams.h to inline with xilinx-ams.c
> > > > - Patch-1
> > > > - Addressed Documentation style comments
> > > >
> > > > Changes in v3:
> > > > - Updated bindings document with the suggested modification in v2
> > > > review
> > > > - Removed documentation for sysfs
> > > > - Removed extended names for channels in the Xilinx AMS driver
> > > > - Modified dts to use ranges for child nodes
> > > > - Reduced address and size cells to 32-bit instead of 64-bit
> > > >
> > > > Changes in v4:
> > > > - Updated bindings document with the suggested modification in v3
> > > > review
> > > > - Changed the Device Tree property 'ranges' for child nodes
> > > > - Used Channel Numbers as 'reg' value in DT to avoid confusion
> > > > - Removed unused NULL arguments as suggested in v3 patch review
> > > > - Addressed comments on Device Tree property naming
> > > >
> > > > Changes in v5:
> > > > - Updated bindings document to the YAML format
> > > > - Updated bindings document with the suggested modification in v4
> > > > review
> > > > - Renamed iio_pl_info struct to iio_ams_info in Xilinx AMS driver
> > > > - Updated the Xilinx AMS driver to not use iio_priv_to_dev function
> > > > - Updated Xilinx AMS node to reflect the changes in bindings
> > > > document
> > > > - Update MAINTAINERS file
> > > >
> > > > Changes in v6:
> > > > - Removed all tabs from bindings document.
> > > > - Removed the xlnx,ext-channels node from the device tree since
> > > > it is not neeeded.
> > > > - Fixed unit addresses for ps-ams and pl-ams.
> > > > - Removed the names property from bindings.
> > > > - Fixed warnings from checkpatch.pl in the driver.
> > > > - devm_add_action_or_reset() used for exit/error path.
> > > > - devm_request_irq() for managed irq request instead of
> > > > request_irq()
> > > >
> > > > Changes in v7:
> > > > - Added use of FIELD_PREP and FIELD_GET.
> > > > - Added the spinlocks back the v1 which were removed in v2 for
> > > > no justifiable reason and replaced with the same mutex. This
> > > > caused deadlocks.
> > > > - Removed the buffered mode information from channel config.
> > > > - Usage of wrapper functions for devm_add_action_or_reset
> > > > callbacks to avoid typecasting functions.
> > > > - Usage of devm_platform_iremap_resource().
> > > > - Handled platform_get_irq() return values.
> > > > - Removed the remove() callback.
> > > > - Fixed the dt-bindings.
> > > >
> > > > Changes in v8:
> > > > - Replaced *_of_() APIs with fwnode.
> > > > - Added missing headers.
> > > > - Fixed documentation.
> > > > - Added devm_add_action_or_reset() for iounmap.
> > > > - Restructured read_raw function.
> > > > - Added helper functions.
> > > > - Usage of GENMASK for all masks.
> > > > - Added defaults for most switch cases. Some can't be added
> > > > since the default will never occur.
> > > >
> > > > Changes in v9:
> > > > - Added a fwnode_iomap().
> > > > - Fixed Kconfig indentation.
> > > > - Added the overflow checks before memory allocation.
> > > > - Usage of fwnode_iomap() instead of iomap().
> > > > - Rename ams_parse_dt() to ams_parse_firmware().
> > > >
> > > > Changes in v10:
> > > > - Fixed licence in zynqmp.dtsi.
> > > > - Changed the macros to use BIT().
> > > > - Realign some code to fit within 100 chars.
> > > > - Modified readl_poll_timeout usage.
> > > > - Usage of array_size() instead of check_mul_overflow().
> > > > - Usage of dev_err_probe() instead of dev_err().
> > > > - Usage of kcalloc instead of kzalloc()
> > > >
> > > > Changes in v11:
> > > > - Added missing bitfield.h.
> > > > - Fixed AMS_ALARM_THR_MIN macro.
> > > > - Added terminators to enums where necessary.
> > > > - Added explicit values as suggested to enums.
> > > > - Removed redundant macros.
> > > > - Added delay value for readl_poll_timeout.
> > > > - Corrected shadowed error return.
> > > > - Corrected formatting errors.
> > > > - Added default cases where missing.
> > > > - Made ams_parse_firmware() a single parameter functions.
> > > > - Usage of devm_kcalloc() and devm_krealloc().
> > > > - Directly returning from dev_err_probe().
> > > > - Renamed masked_alarm to current_masked_alarm.
> > > >
> > > > Changes in v12:
> > > > - GENMASK_ULL usage for 64bit values.
> > > > - Added ams_iounmap_ps and amsiomap_pl instead of generic
> > > > function.
> > > > - Hex values to use all capital letters.
> > > > - Fixed a case of wrong kernel doc.
> > > > - Modified macro voltage names to reflect the scale.
> > > > - Maximize single line usage wherever possible.
> > > > - Handling of fwnode_iomap when CONFIG_OF_ADDRESS is not
> > > > enabled.
> > > > - ams_read_raw() - Reduce the size of switch statements by
> > > > using helper functions for IIO_CHAN_INFO_SCALE.
> > > > - ams_read_raw() - Mutex unlocking in a single place using goto.
> > > >
> > > > Anand Ashok Dumbre (5):
> > > > device property: Add fwnode_iomap()
> > > > arm64: zynqmp: DT: Add Xilinx AMS node
> > > > iio: adc: Add Xilinx AMS driver
> > > > dt-bindings: iio: adc: Add Xilinx AMS binding documentation
> > > > MAINTAINERS: Add maintainer for xilinx-ams
> > > >
> > > > .../bindings/iio/adc/xlnx,zynqmp-ams.yaml | 227 +++
> > > > MAINTAINERS | 7 +
> > > > arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 24 +
> > > > drivers/base/property.c | 16 +
> > > > drivers/iio/adc/Kconfig | 15 +
> > > > drivers/iio/adc/Makefile | 1 +
> > > > drivers/iio/adc/xilinx-ams.c | 1450 +++++++++++++++++
> > > > include/linux/property.h | 2 +
> > > > 8 files changed, 1742 insertions(+) create mode 100644
> > > > Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml
> > > > create mode 100644 drivers/iio/adc/xilinx-ams.c
> > > >
> > > > --
> > > > 2.17.1
> > >
>

\
 
 \ /
  Last update: 2022-01-10 14:41    [W:0.062 / U:1.348 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site