lkml.org 
[lkml]   [2022]   [Jan]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.15 69/72] ARM: dts: gpio-ranges property is now required
Date
From: Phil Elwell <phil@raspberrypi.com>

[ Upstream commit c8013355ead68dce152cf426686f8a5f80d88b40 ]

Since [1], added in 5.7, the absence of a gpio-ranges property has
prevented GPIOs from being restored to inputs when released.
Add those properties for BCM283x and BCM2711 devices.

[1] commit 2ab73c6d8323 ("gpio: Support GPIO controllers without
pin-ranges")

Link: https://lore.kernel.org/r/20220104170247.956760-1-linus.walleij@linaro.org
Fixes: 2ab73c6d8323 ("gpio: Support GPIO controllers without pin-ranges")
Fixes: 266423e60ea1 ("pinctrl: bcm2835: Change init order for gpio hogs")
Reported-by: Stefan Wahren <stefan.wahren@i2se.com>
Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Reported-by: Jan Kiszka <jan.kiszka@web.de>
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20211206092237.4105895-3-phil@raspberrypi.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/bcm2711.dtsi | 2 ++
arch/arm/boot/dts/bcm283x.dtsi | 2 ++
2 files changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
index 9e01dbca4a011..dff18fc9a9065 100644
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@@ -582,6 +582,8 @@
<GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;

+ gpio-ranges = <&gpio 0 0 58>;
+
gpclk0_gpio49: gpclk0_gpio49 {
pin-gpclk {
pins = "gpio49";
diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
index a3e06b6809476..c113661a6668f 100644
--- a/arch/arm/boot/dts/bcm283x.dtsi
+++ b/arch/arm/boot/dts/bcm283x.dtsi
@@ -126,6 +126,8 @@
interrupt-controller;
#interrupt-cells = <2>;

+ gpio-ranges = <&gpio 0 0 54>;
+
/* Defines common pin muxing groups
*
* While each pin can have its mux selected
--
2.34.1


\
 
 \ /
  Last update: 2022-01-10 08:53    [W:0.257 / U:0.580 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site