lkml.org 
[lkml]   [2021]   [Sep]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V3 2/2] arm64: dts: sc7280: Add volume up support for sc7280-idp
Date
Add pm7325 PMIC gpio support for vol+ on sc7280-idp.

Signed-off-by: satya priya <skakit@codeaurora.org>
---
Changes in V2:
- No changes.

Changes in V3:
- Sorted the nodes alphabetically.

arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 31 +++++++++++++++++++++++++++++++
1 file changed, 31 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index 371a2a9..434c1c6 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -239,6 +239,26 @@
cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>;
};

+&soc {
+ gpio_keys {
+ compatible = "gpio-keys";
+ label = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&key_vol_up_default>;
+
+ vol_up {
+ label = "volume_up";
+ gpios = <&pm7325_gpios 6 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_VOLUMEUP>;
+ gpio-key,wakeup;
+ debounce-interval = <15>;
+ linux,can-disable;
+ };
+ };
+};
+
&uart5 {
status = "okay";
};
@@ -284,6 +304,17 @@

/* PINCTRL - additions to nodes defined in sc7280.dtsi */

+&pm7325_gpios {
+ key_vol_up_default: key_vol_up_default {
+ pins = "gpio6";
+ function = "normal";
+ input-enable;
+ bias-pull-up;
+ power-source = <0>;
+ qcom,drive-strength = <3>;
+ };
+};
+
&qup_uart5_default {
tx {
pins = "gpio46";
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
\
 
 \ /
  Last update: 2021-09-09 08:02    [W:0.061 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site