lkml.org 
[lkml]   [2021]   [Sep]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] cpufreq: intel_pstate: Override parameters if HWP forced by BIOS
On Thu, Sep 9, 2021 at 10:22 AM Rafael J. Wysocki <rafael@kernel.org> wrote:
> On Thu, Sep 9, 2021 at 6:12 PM Rafael J. Wysocki <rafael@kernel.org> wrote:
> > On Thu, Sep 9, 2021 at 3:20 PM Doug Smythies <dsmythies@telus.net> wrote:
> > > On Thu, Sep 9, 2021 at 4:18 AM Rafael J. Wysocki <rafael@kernel.org> wrote:
> > > > On Thu, Sep 9, 2021 at 8:52 AM Srinivas Pandruvada
> > > > <srinivas.pandruvada@linux.intel.com> wrote:
> > > > >
> > > > > On Wed, 2021-09-08 at 20:48 -0700, Doug Smythies wrote:
> > > > > > If HWP has been already been enabled by BIOS, it may be
> > > > > > necessary to override some kernel command line parameters.
> > > > > > Once it has been enabled it requires a reset to be disabled.
> > > > > >
> > > > > > Signed-off-by: Doug Smythies <dsmythies@telus.net>
> > > > > > ---
> > > > > > drivers/cpufreq/intel_pstate.c | 22 ++++++++++++++++------
> > > > > > 1 file changed, 16 insertions(+), 6 deletions(-)
> > > > > >
> > > > > > diff --git a/drivers/cpufreq/intel_pstate.c
> > > > > > b/drivers/cpufreq/intel_pstate.c
> > > > > > index bb4549959b11..073bae5d4498 100644
> > > > > > --- a/drivers/cpufreq/intel_pstate.c
> > > > > > +++ b/drivers/cpufreq/intel_pstate.c
> > > > > > @@ -3267,7 +3267,7 @@ static int __init intel_pstate_init(void)
> > > > > > */
> > > > > > if ((!no_hwp && boot_cpu_has(X86_FEATURE_HWP_EPP)) ||
> > > > > > intel_pstate_hwp_is_enabled()) {
> > > > > > - hwp_active++;
> > > > > > + hwp_active = 1;
> > > > > Why this change?
> > > >
> > > > I think hwp_active can be changed to bool and then it would make sense
> > > > to update this line.
> > > >
> > > > > > hwp_mode_bdw = id->driver_data;
> > > > > > intel_pstate.attr = hwp_cpufreq_attrs;
> > > > > > intel_cpufreq.attr = hwp_cpufreq_attrs;
> > > > > > @@ -3347,17 +3347,27 @@ device_initcall(intel_pstate_init);
> > > > > >
> > > > > > static int __init intel_pstate_setup(char *str)
> > > > > > {
> > > > > > + /*
> > > > > > + * If BIOS is forcing HWP, then parameter
> > > > > > + * overrides might be needed. Only print
> > > > > > + * the message once, and regardless of
> > > > > > + * any overrides.
> > > > > > + */
> > > > > > + if(!hwp_active
> > > > > This part of code is from early_param, Is it possible that
> > > > > hwp_active is not 0?
> > > >
> > > > Well, it wouldn't matter even if it were nonzero. This check is just
> > > > pointless anyway.
> > > >
> > > > > > && boot_cpu_has(X86_FEATURE_HWP))
> > > > > > + if(intel_pstate_hwp_is_enabled()){
> > > >
> > > > This should be
> > > >
> > > > if (boot_cpu_has(X86_FEATURE_HWP) && intel_pstate_hwp_is_enabled()) {
> > >
> > > Disagree.
> > > This routine gets executed once per intel_pstate related grub command
> > > line entry. The purpose of the "if(!hwp_active" part is to prevent the
> > > printing of the message to the logs multiple times.
> >
> > Ah OK. Fair enough.
> >
> > You can do all of the checks in one conditional, though. They will be
> > processed left-to-right anyway.
> >
> > But then it would be good to avoid calling
> > intel_pstate_hwp_is_enabled() multiple times if it returns false.
> >
> > And having said all that I'm not sure why you are trying to make
> > no_hwp depend on !hwp_active? I will not be taken into account anyway
> > if intel_pstate_hwp_is_enabled() returns 'true'?
> >
> > So if no_hwp is covered regardless, you may move the
> > intel_pstate_hwp_is_enabled() inside the no_load conditional.
> >
> > Alternatively, and I would do that, intel_pstate_hwp_is_enabled()
> > could be evaluated earlier in intel_pstate_init() and if it returned
> > 'true', both no_load and no_hwp would be disregarded.
>
> Something like the attached, for the record.

O.K. and Thanks.
I was trying to avoid this line getting into the log:

[ 0.000000] intel_pstate: HWP disabled

only to overridden later by, now, these lines:

[ 0.373742] intel_pstate: HWP enabled by BIOS
[ 0.374177] intel_pstate: Intel P-state driver initializing
[ 0.375097] intel_pstate: HWP enabled

Let me see if I can go with your suggestion and get to
what I had hoped to get in the logs.

By the way, my current command line options are:

[ 0.000000] Command line:
BOOT_IMAGE=/boot/vmlinuz-5.14.0-ipstate9
root=UUID=0ac356c1-caa9-4c2e-8229-4408bd998dbd
ro ipv6.disable=1 consoleblank=314 intel_pstate=force
intel_pstate=active intel_pstate=no_hwp
msr.allow_writes=on cpuidle.governor=teo

... Doug

\
 
 \ /
  Last update: 2021-09-10 05:15    [W:0.079 / U:0.856 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site