lkml.org 
[lkml]   [2021]   [Sep]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 0/6] vDPA driver for legacy virtio-pci device
On Thu, Sep 09, 2021 at 11:05:06AM +0800, Jason Wang wrote:
> On Wed, Sep 8, 2021 at 8:22 PM Wu Zongyong <wuzongyong@linux.alibaba.com> wrote:
> >
> > This series implements the vDPA driver for legacy virtio-pci device.
> > Currently we already have the vDPA driver for modern virtio-pci device
> > only, but there are some legacy virtio-pci devices conforming to the
> > virtio-pci specifications of 0.9.x or older versions. For example,
> > ENI(Elastic Network Interface) of Alibaba ECS baremetal instance is a
> > hardware virtio network device which follows the Virtio PCI Card 0.9.5
> > Draft specification. Such legacy virtio-pci devices have some
> > inconsistent behaviour with modern virtio-pci devices, so some common
> > codes are split out and modern device specific codes are moved to a
> > separated file.
>
> What worries me a little bit are:
>
> 1) vDPA requires IOMMU_PLATFORM to be supported by the device to work,
> if I understand ENI correctly, it's a legacy device so it can't
> support ACCESS_PLATFORM. Or is it a legacy device that supports
> ACCESS_PLATFORM implicitly.
> 2) vDPA tries to present a 1.0 device, in this case the behavior could
> be ruled by the spec. If we tries to present an 1.0 device on top of
> legacy device we may suffer a lot of issues:
>
> - endian issue: 1.0 use le but legacy may use native endian
> - queue_enable semantic which is missed in the legacy
> - virtqueue size, as you mentioned below
>
> I guess what the device(ENI) supports are:
>
> 1) semantic of ACCESS_PLATFORM without a feature
> 2) little endian
> 3) but a legacy device
>
> So I think it might be better:
>
> 1) introduce the library for legacy as you did in this patch
> 2) having a dedicated ENI vDPA driver

Would you mind I place the ENI vDPA driver inside virtio_pci folder? Or
should I create a new folder for it?

>
> 3) live migration support, though it was not supported by the spec
> yet, but we are working on the support, and we know legacy device can
> support this.
>
> Thanks
>
> >
> > For legacy devices, it is not supported to negotiate the virtqueue size
> > by the specification. So a new callback get_vq_num_unchangeable is
> > introduced to indicate user not to try change the virtqueue size of the
> > legacy vdpa device. For example, QEMU should not allocate memory for
> > virtqueue according to the properties tx_queue_size and rx_queue_size if
> > we use legacy virtio-pci device as the vhost-vdpa backend. Instead, QEMU
> > should use the new callback get_vq_num_unchangeable first to check if
> > the vdpa device support to change virtqueue size. If not, QEMU should
> > call the callback get_vq_num_max to get the static virtqueue size then
> > allocate the same size memory for the virtqueue.
> >
> > This series have been tested with the ENI in Alibaba ECS baremetal
> > instance.
> >
> > These patches may under consideration, welcome for comments.
> >
> >
> > Wu Zongyong (6):
> > virtio-pci: introduce legacy device module
> > vdpa: fix typo
> > vp_vdpa: add vq irq offloading support
> > vp_vdpa: split out reusable and device specific codes to separate file
> > vdpa: add get_vq_num_unchangeable callback in vdpa_config_ops
> > vp_vdpa: introduce legacy virtio pci driver
> >
> > drivers/vdpa/Kconfig | 7 +
> > drivers/vdpa/virtio_pci/Makefile | 3 +
> > drivers/vdpa/virtio_pci/vp_vdpa.c | 8 +
> > drivers/vdpa/virtio_pci/vp_vdpa_common.c | 220 ++++++++++++++
> > drivers/vdpa/virtio_pci/vp_vdpa_common.h | 67 +++++
> > drivers/vdpa/virtio_pci/vp_vdpa_legacy.c | 346 +++++++++++++++++++++++
> > drivers/vdpa/virtio_pci/vp_vdpa_modern.c | 327 +++++++++++++++++++++
> > drivers/vhost/vdpa.c | 19 ++
> > drivers/virtio/Kconfig | 10 +
> > drivers/virtio/Makefile | 1 +
> > drivers/virtio/virtio_pci_common.c | 10 +-
> > drivers/virtio/virtio_pci_common.h | 9 +-
> > drivers/virtio/virtio_pci_legacy.c | 101 ++-----
> > drivers/virtio/virtio_pci_legacy_dev.c | 220 ++++++++++++++
> > drivers/virtio/virtio_vdpa.c | 5 +-
> > include/linux/vdpa.h | 6 +-
> > include/linux/virtio_pci_legacy.h | 44 +++
> > include/uapi/linux/vhost.h | 2 +
> > 18 files changed, 1320 insertions(+), 85 deletions(-)
> > create mode 100644 drivers/vdpa/virtio_pci/vp_vdpa_common.c
> > create mode 100644 drivers/vdpa/virtio_pci/vp_vdpa_common.h
> > create mode 100644 drivers/vdpa/virtio_pci/vp_vdpa_legacy.c
> > create mode 100644 drivers/vdpa/virtio_pci/vp_vdpa_modern.c
> > create mode 100644 drivers/virtio/virtio_pci_legacy_dev.c
> > create mode 100644 include/linux/virtio_pci_legacy.h
> >
> > --
> > 2.31.1
> >

\
 
 \ /
  Last update: 2021-09-09 15:37    [W:0.304 / U:0.316 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site